Availability of 2 inch Hitch for 2015 Subaru WRX

Question

Question:

I was looking at the different options for the 2015 Subaru WRX Trailer Hitch. I see that there is various hitch sizes for the ecohitch, but not for the Curt Class I Receiver Hitch which only supports 1.25inch. Do you have a 2inch receiver inlet for Curt Class I Receiver Hitch?

asked by: Lynn

0

Expert Reply:

There is only one 2 inch trailer hitch we offer for the 2015 Subaru WRX, the EcoHitch part # 306-X7257 that you referenced.

None of the other manufacturers have a 2 inch hitch for this vehicle.

expert reply by: Jameson C

0

Answer 1

I went out to our warehouse to take a look at the EcoHitch Class III Trailer Hitch #306-X7257 referenced in your question, which is confirmed to fit your 2015 Subaru WRX. The receiver is actually hollow but from front to back it measures exactly 4…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The EcoHitch Invisi Trailer Hitch Receiver part #306-X7257 is a 2" x 2" receiver tune opening. While we do not sell the 1UP from what I have seen of them they come in the 2" x 2" variety. If your is 2" compatible it will work…

view full answer...

Answer 4

For your 2020 Subaru WRX I recommend the EcoHitch part #306-X7257 as it has plenty of towing capacity for your camper but also because it's only option that fits behind the rear bumper panel of your vehicle for a concealed look and also better…

view full answer...

Answer 5

That's a tricky question that would be very difficult to answer. The hitches are designed to fit around a stock exhaust. If your aftermarket exhaust sits exactly where the stock exhaust would, then the #306-X7257 EcoHitch would fit perfectly for…

view full answer...

Answer 6

The EcoHitch Invisi Trailer Hitch Receiver #306-X7257 referenced in your question is confirmed to fit your 2019 Subaru WRX. This particular hitch will fit all trim models of the 2015-2019 Subaru WRX. I like this hitch a lot because of its sleek…

view full answer...

Answer 7

As long as your 2018 Subaru WRX has the center knockout panel in the rear bumper for a trailer hitch we do have a 2 inch receiver that fits; the EcoHitch, part #306-X7257. I've attached a picture so you can see where it fits through the bumper.…

view full answer...

Answer 8

The shipping weight of the EcoHitch Invisi Trailer Hitch Receiver - Custom Fit part #306-X7257 is about 31 lbs. This hitch fits 2015 - 2019 Subaru WRX. It is a completely hidden design so the hitch is completely out of sight for a clean factory look…

view full answer...

Answer 9

The best hitch option for your 2018 Subaru WRX is the EcoHitch Invisi Trailer Hitch Receiver #306-X7257. This is because it has a completely hidden look and fits in the factory cutout of your rear bumper for a factory look. The 2 inch receiver…

view full answer...

Answer 10

The EcoHitch part #306-X7257 that you referenced weighs 36 lbs.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Availability of 2 inch Hitch for 2015 Subaru WRX

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching