Will the Eco Hitch Invisi Hitch Work with my 1UP Bike Rack

Question

Question:

Will a 1up Equip D model rack be compatible with the hitch with no issues?

asked by: Patrick

0

Expert Reply:

The EcoHitch Invisi Trailer Hitch Receiver part # 306-X7257 is a 2" x 2" receiver tune opening. While we do not sell the 1UP from what I have seen of them they come in the 2" x 2" variety. If your is 2" compatible it will work out great for you. The only thing to be sure of is that you will need to have less than 2.5" of shank behind the pin hole on your rack for the holes to line up.

expert reply by: Randy B

0

Answer 1

I went out to our warehouse to take a look at the EcoHitch Class III Trailer Hitch #306-X7257 referenced in your question, which is confirmed to fit your 2015 Subaru WRX. The receiver is actually hollow but from front to back it measures exactly 4…

view full answer...

Answer 2

I don't have a list of every bike rack the EcoHitch Invisi Trailer Hitch Receiver part #306-X7257 which is a fit for a 2016 Subaru WRX will work with unfortunately. That said, the main issue we see with this trailer hitch in regards to bikes rack…

view full answer...

Answer 3

The only hitch we carry for your 2015 Subaru WRX that will allow you to use your dirt bike carrier is the EcoHitch Invisi Trailer Hitch Receiver #306-X7257. This is a 2 inch receiver that is rated for tongue weight of up to 525 lbs, so it is the best…

view full answer...

Answer 4

I recommend the EcoHitch Invisi Trailer Hitch Receiver part #306-X7257 which is designed to be hidden behind the bumper's knock out panel. When not in use the knock out panel can be replaced for a completely discreet look on your Subaru. I have…

view full answer...

Answer 5

The shipping weight of the EcoHitch Invisi Trailer Hitch Receiver - Custom Fit part #306-X7257 is about 31 lbs. This hitch fits 2015 - 2019 Subaru WRX. It is a completely hidden design so the hitch is completely out of sight for a clean factory look…

view full answer...

Answer 6

That's a tricky question that would be very difficult to answer. The hitches are designed to fit around a stock exhaust. If your aftermarket exhaust sits exactly where the stock exhaust would, then the #306-X7257 EcoHitch would fit perfectly for…

view full answer...

Answer 7

The EcoHitch part #306-X7257 that you referenced weighs 36 lbs.

view full answer...

Answer 8

The best hitch option for your 2018 Subaru WRX is the EcoHitch Invisi Trailer Hitch Receiver #306-X7257. This is because it has a completely hidden look and fits in the factory cutout of your rear bumper for a factory look. The 2 inch receiver…

view full answer...

Answer 9

There is only one 2 inch trailer hitch we offer for the 2015 Subaru WRX, the EcoHitch part #306-X7257 that you referenced. None of the other manufacturers have a 2 inch hitch for this vehicle.

view full answer...

Answer 10

The EcoHitch Invisi Trailer Hitch Receiver #306-X7257 referenced in your question is confirmed to fit your 2019 Subaru WRX. This particular hitch will fit all trim models of the 2015-2019 Subaru WRX. I like this hitch a lot because of its sleek…

view full answer...

Answer 11

For your 2020 Subaru WRX I recommend the EcoHitch part #306-X7257 as it has plenty of towing capacity for your camper but also because it's only option that fits behind the rear bumper panel of your vehicle for a concealed look and also better…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...