How To Find Correct Hubs for 3,700 Lb Axis Products Trailer Axle
Question:
I have a tandem axle boat trailer and am needing to replace a hub on the free axle. It is an Axis Products 3700# axle made in 08/07. Serial # 203640 C 004. What would you suggest?
asked by: Chris R
Expert Reply:
In most cases, a 3,700 lb axle will use the same bearings and seal as a 3,500 lb axle which means you can use any hub for a 3,500 lb axle on a 3,700 lb axle. The bearings for a 3,500 lb axle are L68149 for the inner, L44649 for the outer, and the seal is a 10-19. If this is what you have you can use the Dexter Trailer Idler Hub Assembly part # 84545UC1-EZ. Unfortunately, there's no way for us to know what you have for sure, even with the serial number. If you want to know for sure what you have, the only way would be to pull a hub and read and or measure the bearings and seal. I have attached an article below that will walk you through this. I have also attached for you below a list of our hubs, you can filter by type, size, and bolt pattern etc.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Dust Cap for Kodiak Disc Brake Kit
- Shop: Bearing Kit w/ Stainless Nuts for Disc Brakes w/ 8" or 10" Hub/Rotor - 3,500 lbs
- Shop: Spindle Nut Kit for EZ Lube Axles
- Shop: DeeMaxx Stainless Steel Drive-In Grease Cap w/ Plug - 1.98" Outer Diameter
- Search Results: bearing buddy
- Search Results: ez lube cap
- Search Results: bearing caps
- Search Results: #84 spindle
- Search Results: spindle nut
- Q&A: Can Bearing Buddy Fit on EZ Lube Spindle that has Zerk Fitting
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Search Results: bumper
- Search Results: spare tire mount
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Correct Replacement Hub for Boat Trailer with 3,500 Lb Axle.
- Article: Trailer Tire Sizing
- Q&A: Can I Guess or Estimate Axle Weight Capacity By Number of Lug Nuts
- Q&A: Replacement Idler Hubs For 2011 TDX Pro Team Tracker Trailer With TDE 46210 Stamped on Hubs
- Q&A: Trailer Wheel Bearings Burning Out Repeatedly After Little Mileage
- Q&A: Boat Trailer Hub for my Trailmaster Boat Trailer.
- Q&A: Trailer Capacity for Axles with 5 Lugs
- Video: etrailer Trailer Idler Hub Assembly Installation
- Shop: BOLT brand vehicle and hitch locks