Does Bulldog Winch # BDW15019 Have Capacity for Pulling 3,500 lb Vehicle onto Trailer

Question

Question:

good evening, would this winch be suitable to pull a 3500 lb car onto an enclosed trailer? Bulldog Winch Trailer Winch - Wire Rope - Roller Fairlead - 4,400 lbs Item # BDW15019 thank you

asked by: Dominic B

0

Expert Reply:

The Bulldog Winch part # BDW15019 would easily be able to pull your 3,500 lb car onto the trailer. It has a 4,400 static weight capacity, but the rolling weight capacity (which is what a car would be in neutral), is 44,000 lbs.

expert reply by: Jameson C

0

Answer 1

Yes, the Superwinch Terra part #SW1145220 does have a power out as well as a power in so it can let a car out of a trailer in a controlled manner like you mentioned.

view full answer...

Answer 2

The holes on the mounting plate for the Bulldog Winch #BDW15019 are spaced 3-1/8 inches x 4 inches center on center. The winch mounts to the plate in holes that are 6-5/8 inches x 3 inches apart center on center. I have attached a photo showing these…

view full answer...

Answer 3

Good news! The Bulldog Winch #BDW15019 will work great for loading your 18 foot car hauler with a vehicle up to 4,000lbs. We recommend using a winch with a line pull capacity no less than equal to that of the load being moved. For example, if a car…

view full answer...

Answer 4

For a cost-effective powered car trailer winch you can consider the Bulldog Winch #BDW15019 which includes a roller fairlead and wire rope. This winch offers a 2-minute duty cycle (15 minutes of cool down time is required between cycles) and with a…

view full answer...

Answer 5

The winch you referenced, Superwinch Terra Series ATV Winch #SW1145220, has a 4-bolt mounting pattern for the winch that measures 3- x 6.66-inches on the hole centers. This is common to their other ATV winches such as #SW1125230. Please refer to the…

view full answer...

Answer 6

For your application a winch mount like the Bulldog part #BDW20011 would be what I would recommend. This is compatible with the Terra 45 winch and since it has large handles on either side will make for an easier to installing and removing from your…

view full answer...

Answer 7

The only way I can safely recommend you install the Superwinch Terra Series ATV Winch - Wire Rope #SW1125220 on your 2010 Canam 650 is to use the wiring kit that comes with it. The wiring kit does include relays and circuit breakers that are rated…

view full answer...

Answer 8

I've checked with my Bulldog representative, and have been told that the #BD15174 is indeed the correct winch mount for your 2015 Polaris Sportsman 570. My representative went on to tell me that the mount is compatible with the Superwinch Terra…

view full answer...

Answer 9

We have winch mounts for the 2013 Polaris 550 Sportsman as long as it is an XP, Touring, or X2 model. The mount is #BDW15151. There could be some trimming of the front panel that will need to be done to install the winch on some models.

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 12

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...