Superwinch Terra Series ATV Winch Review Video

Yes, the Superwinch Terra part #SW1145220 does have a power out as well as a power in so it can let a car out of a trailer in a controlled manner like you mentioned.

Yes, since the vehicles you would be winching on your car hauler are a rolling load a winch like the part #SW1145220 which has a 4,500 lb capacity would work well. Even if you ramps had a 60 percent angled ramp this winch could pull up to 7,488 lbs.

The Bulldog Winch part #BDW15019 would easily be able to pull your 3,500 lb car onto the trailer. It has a 4,400 static weight capacity, but the rolling weight capacity (which is what a car would be in neutral), is 44,000 lbs.

For your application a winch mount like the Bulldog part #BDW20011 would be what I would recommend. This is compatible with the Terra 45 winch and since it has large handles on either side will make for an easier to installing and removing from…

For a cost-effective powered car trailer winch you can consider the Bulldog Winch #BDW15019 which includes a roller fairlead and wire rope. This winch offers a 2-minute duty cycle (15 minutes of cool down time is required between cycles) and with a…

Good news! The Bulldog Winch #BDW15019 will work great for loading your 18 foot car hauler with a vehicle up to 4,000lbs. We recommend using a winch with a line pull capacity no less than equal to that of the load being moved. For example, if a car…

The holes on the mounting plate for the Bulldog Winch #BDW15019 are spaced 3-1/8 inches x 4 inches center on center. The winch mounts to the plate in holes that are 6-5/8 inches x 3 inches apart center on center. I have attached a photo showing…

The winch you referenced, Superwinch Terra Series ATV Winch #SW1145220, has a 4-bolt mounting pattern for the winch that measures 3- x 6.66-inches on the hole centers. This is common to their other ATV winches such as #SW1125230. Please refer to…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The etrailer ATV Winch - Synthetic Rope - Hawse Fairlead - 5,000 lbs #e98989 does not have the capability of using a handlebar switch. It does however have an 11 foot long cord with controls attached. The Superwinch LT2000 ATV Winch - Wire Rope -…

I do have an option for you but I reached out to Superwinch and the clutch handle is not replaceable on the Superwinch S4000. Therefore, if this is broken or faulty then the entire winch would need to be replaced but we do have a great cost…

Th etrailer ATV winch part #e98989 comes with a handheld remote but we don't have a rocker switch solution for the Kubota you have. The harness of the switch is pretty long though so maybe you could zip tie it somewhere convenient for you to…