Does the Front Bumper Have to Be Trimmed to Install a Winch on a 2013 Polaris Sportsman 550 ATV

Question

Question:

Is front bumper trimming required? Will wiring require shortening?

asked by: William C

0

Expert Reply:

We have winch mounts for the 2013 Polaris 550 Sportsman as long as it is an XP, Touring, or X2 model. The mount is # BDW15151. There could be some trimming of the front panel that will need to be done to install the winch on some models.

expert reply by: Michael H

0

Answer 1

The only way I can safely recommend you install the Superwinch Terra Series ATV Winch - Wire Rope #SW1125220 on your 2010 Canam 650 is to use the wiring kit that comes with it. The wiring kit does include relays and circuit breakers that are rated…

view full answer...

Answer 2

I've checked with my Bulldog representative, and have been told that the #BD15174 is indeed the correct winch mount for your 2015 Polaris Sportsman 570. My representative went on to tell me that the mount is compatible with the Superwinch Terra…

view full answer...

Answer 3

Superwinch electric winch #SW1135230 will indeed work with your 2013 Polaris 550 X2. You will need mount #BDW15151 which is custom fit for your particular ATV. I have linked videos on both parts for you.

view full answer...

Answer 4

The Bulldog Winch part #BDW15019 would easily be able to pull your 3,500 lb car onto the trailer. It has a 4,400 static weight capacity, but the rolling weight capacity (which is what a car would be in neutral), is 44,000 lbs.

view full answer...

Answer 5

Good news! The Bulldog Winch #BDW15019 will work great for loading your 18 foot car hauler with a vehicle up to 4,000lbs. We recommend using a winch with a line pull capacity no less than equal to that of the load being moved. For example, if a car…

view full answer...

Answer 6

The holes on the mounting plate for the Bulldog Winch #BDW15019 are spaced 3-1/8 inches x 4 inches center on center. The winch mounts to the plate in holes that are 6-5/8 inches x 3 inches apart center on center. I have attached a photo showing these…

view full answer...

Answer 7

If you're going to use a winch to raise and lower your popup you will want a winch that power loads both in and out. With a winch that will only power load in you will only be able to raise the popup and not lower with the winch. We have the…

view full answer...

Answer 8

When replacing the electric winch on your 2007 Rockwood popup camper, you want to look at the weight rating and mounting-plate bolt pattern of your current winch along with the dimensions to ensure fitment. It looks like the Superwinch LT3000 ATV…

view full answer...

Answer 9

We have 12 volt winches like the Superwinch LT2000 part #1120210 that would work well for what you need as this has a 2,000 lb capacity but we do not carry the specific winch you are looking for.

view full answer...

Answer 10

If you're going to use a winch to raise and lower your popup you will want a winch that power loads both in and out. With a winch that will only power load in you will only be able to raise the popup and not lower with the winch. We have the…

view full answer...

Answer 11

The Dexter Trailer Hub Assembly you referenced, part #AKIHUB-440-2-1K is known as an idler hub. An idler is a hub that is no provisions for trailer brakes. It has no brake drum. Part #8-276-5 is an example of a hub/ drum that has a brake drum that…

view full answer...

Answer 12

For the Superwinch LT2000 ATV Winch #1120210 we currently sell that winch kitted with the upgraded switch kit. This switch kit would attach to the handle bars on your ATV that you were using the winch on. If you are talking about the hand held remote…

view full answer...

Does the Front Bumper Have to Be Trimmed to Install a Winch on a 2013 Polaris Sportsman 550 ATV

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching