Recommended Ball Mount with Long Shank and 10 Inch Drop with 2 Hitch Balls
Question:
I am looking at the product: FA49-00-5900 I had a few question about it. My truck has a 2 in Hitch receiver, and the top of the receiver is at 23 inches. I am looking for at 10-12 In ball due to my car hauler has a dovetail, and I want to keep from dragging so I try keeping the front slightly lower. My main question is my truck has an extended bumper. The receiver is recessed underneath the bumper. From the hitch pin in the receiver to the edge of the bumper is 8 inches. would this product stick out far enough, or do you have another product which stands out at least 8 inches from the receiver pin to where the ball mount slits to where its adjustable? Is there another product which you feel would be a better fit? If possible I am looking for something in which I can flip from 2 in and 2 5/16 easily. Thanks!
asked by: Logan
Expert Reply:
The Flash Solid Steel Adjustable 2-Ball Mount - 2" Hitch - 10" Drop, 11" Rise - 12K # FA49-00-5900 you mentioned has a distance from the center of the hitch pin hole to the center of the hitch ball of 9 inches so part of your coupler would still be under your rear bumper.
My recommendation for you is the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 10" Drop/Rise - 10K # 325-GH-325. This ball mount has a measurement from the center of the hitch pin hole to the center of the ball of 12 inches. This mount has a 10 inch drop and is adjustable in 5 increments.
With this ball mount, I also recommend the Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 2-5/8" Span # 63232 to secure your ball mount and deter theft.
I've attached videos to assist.
Products Referenced in This Question
Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 10" Drop/Rise - 10K
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 2 Inch Ball
- 2-5/16 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gray
- Drop - 10 Inch
- Rise - 10 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- Built-In Pintle Hook
- Stacked Receivers
- Gen-Y Hitch
more information >
Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 3-1/2" Span
- Trailer Hitch Lock
- Universal Anti-Rattle Lock
- Keyed Unique
- Fits 2 Inch Hitch
- Spring-Loaded Pin
- 3-1/2 Inch Span
- Lets Go Aero
more information >
Product Page this Question was Asked From
Flash Strong Solid Steel 2-Ball Mount - 2" Hitch - 10" Drop, 11" Rise - 12K
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 2 Inch Ball
- 2-5/16 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 10 Inch
- Rise - 11 Inch
- Fits 2 Inch Hitch
- 12000 lbs GTW
- 8000 lbs GTW
- Class IV
- Fastway
more information >
Continue Researching
- Shop: Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
- Shop: Trailer Hitch Ball Mount 10" Drop, 7,500 lbs
- Shop: Convert-A-Ball Ball Mount for 2" Hitches - 8-3/4" Rise - 10" Drop - 8,000 lbs
- Shop: Channel Tongue Trailer Coupler - Trigger Latch - Zinc - 2" Ball - Bolt On - 3,500 lbs
- Video: Convert-A-Ball Ball Mount Review AMSC10
- Video: Review of Gen-Y Hitch Trailer Hitch Ball Mount - Adjustable 2-Ball Mount - 325-GH-325
- Video: Review of Gen-Y Hitch Trailer Hitch Ball Mount - Adjustable Ball Mount - 325-GH-626
- Video: Convert-A-Ball Ball Mounts - Fixed Ball Mount - AMSC12 Review
- Q&A: 10 Rise Adapter Needed to Tow 3,500 lb Pintle Hook Trailer
- Q&A: How to Pick Out the Correct Rise/Drop Ball Mount to Tow Trailer Level
- Q&A: Ball Mount Recommendation for 2017 Chevy Suburban Z71
- Q&A: How to Choose a Ball Mount for a 2015 Chevrolet Suburban
- Shop: Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 12-1/2" Drop - 16K
- Shop: Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 10" Drop/Rise - 10K
- Shop: Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2-1/2" Hitch - 15" Drop - 21K
- Search Results: 12 inch drop hitch
- Shop: Trailer Hitch
- Article: How to Measure for Trailer Hitch Drop
- Video: Choosing the Right Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Search Results: trailer hitch ball mount
- Video: Lock N Roll 3-Position Channel Articulating Hitch Review
- Shop: Trailer Wiring
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Brake Controller
- Video: Choosing the Right Brake Controller
- Search Results: hitch lock