How to Determine Which Replacement Wheel Bearings and Grease Seals are Needed for Trailer Hubs
Question:
Hi, I am going to re-pack/replace my boat trailer wheel bearings, and was wondering what measurements I need to make to find the size of the bearing/seals without taking the whole thing apart first.
asked by: Ben B
Helpful Expert Reply:
If you're planning on repacking the bearings, you'll need to take everything apart anyhow. Might as well do it now, since it'll be necessary to determine which bearings you need.
The easiest way to find replacement bearings and seals would be to get the reference numbers off the inner and outer wheel bearings and the diameter of the spindle where the grease seal rides. If you can't find the reference numbers, measure the spindle diameter where both the inner and outer bearings ride. To take these measurements, you'll need a highly accurate measuring tool, such as a digital caliper. I'll link you to a photo that shows exactly what needs to be measured.
With this information, I would be happy to recommend replacements for you. I'll link you to an FAQ article that shows how to repack trailer bearings, if you're not familiar with the process.
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Video: etrailer Trailer Idler Hub Assembly Installation
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Shop: Replacement Spindle Washer - Tang Type for E-Z Lube
- Q&A: How to Pick Out Replacement Hub for 2002 Triton Snowmobile Trailer
- Shop: Replacement Trailer Hub Bearing - L44649
- Shop: Spindle Nut Kit for EZ Lube Axles
- Shop: Bearing Kit, 15123/25580 Bearings, GS-2125DL Seal
- Video: etrailer Trailer Hub and Drum Assembly Installation AKHD-555-35-EZ-K
- Q&A: Which Trailer Axle Over Under Kit Fits Trailer Axle with 7.5 inch Circumference
- Search Results: dexter axle
- Search Results: dexter torsion axle
- Search Results: dexter torsion axle lift kit
- Search Results: l44649
- Search Results: dexter
- Search Results: 125255uc seal
- Search Results: al ko
- Q&A: How to Pick Out Replacement Hub Drums for a AL KO Axle
- Q&A: Length of Inner Part of #84 Spindle
- Q&A: Replacement Hub/Drum and Brake Assemblies for Trailer with AL-KO 8460 Hubs
- Q&A: How to Pick Out Bearings for a Tandem Axle Pontoon Boat Trailer
- Video: etrailer Trailer Bearings Races Seals Caps - Bearings - 02475 Review
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Hub with Integrated Drum - AKHD-555-35-EZ-K
- Q&A: What is the Closest Trailer Tire in Size to a P235/75-15 Car Tire
- Video: Redline Trailer Brakes 4-35 Review
- Video: Review of etrailer by AxleTek Trailer Axles - 2200 LBS Trailer Idler Axle - e43GR
- Article: Trailer Tire Sizing