Brophy Camper Hold Down Brackets # HSSF Recommendation for a 2005 Chevy Silverado 1500 Extended Cab

Question

Question:

Will the Brophy Camper tie downs fit a 2005 Chevy Silverado 1500 extended cab pickup with a 7ft camper?

asked by: Pat W

0

Expert Reply:

For your 2005 Chevy Silverado 1500 extended cab truck with a 7 foot bed you would want Camper Hold Down Black Powder Coated # HSSF. These hold downs will secure any camper shell to your truck as long as the camper shell is designed to work on your truck.

The hold downs wrap around the truck bed rails and mount inside the bed. They do not fit in the stake pockets.

expert reply by: Jameson C

0

Answer 1

I attached a diagram I got from the instructions that shows how the front bracket of the #LC182861 installs for you to check out.

view full answer...

Answer 2

For your 2005 Dodge Ram 1500 and the Brophy camper tie downs #TDSF you will need hardware that is the right grade and for the right material (in this case steel) just longer than the included hardware. I recommend using grade 8 hardware. A hardware…

view full answer...

Answer 3

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 4

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 5

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 6

Hey David, thank you for the photos and explanation! That is most definitely an Aries Grille Guard, and if it came off of a 2006 Chevy Silverado 1500 then we're looking at the part #AA4059-2 which will also fit your 2003 model by using the…

view full answer...

Answer 7

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

view full answer...

Answer 8

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

view full answer...

Answer 9

We don't have the specific number but what I think will be more helpful for you is the distance from the rear most portion of the bumper to the hitch pin hole. Which for the #41932 that dimension is 1-1/2 inches. Check out the picture I attached…

view full answer...

Answer 10

Yes you can absolutely use the HappiJac Qwik-Load Turnbuckles for Camper Tie-Downs #LC182895 with your TorkLift tie downs.

view full answer...

Answer 11

We have spoken with Brophy in the past and for a Ford F-150 with aluminum body such as your 2017 model they recommend using the Brophy Clamp On Camper Tie-Downs part #HSSF. There won't be any issues with these tie downs and an aluminum bed so…

view full answer...

Answer 12

According to CR Brophy, the camper tie down brackets you'd looked at, part #HSWB are specifically designed to fit the bed of a 2019 Ford F-250 and 350. There does indeed need to be 2 inches of available space under the lip of the truck bed side…

view full answer...

Brophy Camper Hold Down Brackets # HSSF Recommendation for a 2005 Chevy Silverado 1500 Extended Cab

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching