Replacement Key for a 2011 Audi Q7 Roof Rack

Question

Question:

I just purchased a 2011 Audi Q7 with a factory Audi roof rack. The dealer did not have the keys. I understand that Thule makes these racks. The number on the cylinders in 025 no N prefix. Do you carry a replacement?

asked by: Terry B

0

Expert Reply:

We do offer a key, part # THKEYN025. The N is simpy to represent "Number" in the part number.

expert reply by: Jacob W

0

Answer 1

Yes, both the Curt Trailer Hitch part #C13277 and etrailer trailer hitch part #e88KR require fascia trimming on the 2019 Audi Q7. Both installations require the temporary removal of the bumper beam as well to get to the install location. This is…

view full answer...

Answer 2

Yes, all of the hitches we carry for your 2020 Audi Q7 require fascia trimming. The Curt, part #C13277 has the least amount of trimming. I've attached pictures that show how much trimming is needed for each hitch. Despite the Curt requiring…

view full answer...

Answer 3

For the Thule Big Mouth bike rack the correct adapter is the Thule #XADAPT2. This will allow your bike rack to install on the crossbars of your rack and work well.

view full answer...

Answer 4

The correct mounting hardware for the Sears X-Cargo 20 SV is the part #TH05603. We confirmed this with our contact at Thule who manufactures the Sears boxes.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 12

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Replacement Key for a 2011 Audi Q7 Roof Rack

Product Page this Question was Asked From

Continue Researching