Replacement Allen Key For Rhino-Rack 2500

Question

Question:

I lost the Torque Allen Key that came with my roof rack TORKEY-L. Can I get a replacement? Thanks.

asked by: Rich F

0

Expert Reply:

Based on the info in our system, it looks like you are looking for the wrench to go with the Rhino-Rack 2500 system. For this system, you will want the Replacement Rhino Rack Security Allen Key - Long # SECKEY-L.

expert reply by: Jason S

0

Answer 1

Thanks for the photo, and what it seems to me when I zoomed in on the image was that your lock core read "012". I recommend taking a little closer look to verify this, but if it does say "012" you can get a new…

view full answer...

Answer 2

The Rhino-Rack Custom DK Clamps and Pads #DK227 that you referenced does not come with a security Allen wrench security key in this kit. The #DK227 includes 4 clamps and 4 pads which are vehicle specific. If you would like an additional security…

view full answer...

Answer 3

All three components of the Rhino Rack part numbers #RRVA118B-2, #RRRLKVA, and #DK289 would be needed. The bars, the feet, and the adapter kit that attaches the feet to the factory fixed mounting holes of the roof of the vehicle.

view full answer...

Answer 4

The thin black plastic strip on the 2005 Mazda 3 is the rain gutter. There are no mounting points under that strip. You will want to go with a roof rack for a naked roof with no existing rails for mounting points, I recommend the following roof rack:…

view full answer...

Answer 5

I don't think I have actually seen anyone put the molding back on after removing it. The fixed mounting points were specifically designed to have a roof rack added on, so they are sealed and will not leak or anything. You technically could alter…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Replacement Allen Key For Rhino-Rack 2500

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching