Removing Locked Rhino-Rack Lock Core Number 012 Without a Key

Question

Question:

I see they dont offer replacement locks. How do I remove the old lock core without a key to unlock it?

asked by: Ashlee T

0

Expert Reply:

Thanks for the photo, and what it seems to me when I zoomed in on the image was that your lock core read "012". I recommend taking a little closer look to verify this, but if it does say "012" you can get a new key, and new cores with Rhino-Rack Masterkey Lock Barrels # RRRK012-2.

Keys are not sold by themselves by Rhino-Rack, which is why this is the only way to get a key. If your Rhino-Rack roof rack is locked and it does not read "012" on the lock core, you would have to either call a locksmith to have them remove the cores, or to drill them out yourself, though this could cause irreparable damage.

expert reply by: Kyle S

0

click to enlarge

Answer 1

I have a replacement option for you. Unfortunately, Rhino-Rack does not carry just the replacement keys themselves. However, they do make replacements that come with the key and lock cylinders. The most cost efficient route is to purchase the…

view full answer...

Answer 2

Like you said, there isn't a master key for the RockyMounts lock cores. In order to change out a lock core you will need access to the back of the lock. Then with a small flat blade screwdriver or a knife you can press down on the pin that…

view full answer...

Answer 3

If you do not have the key and can no longer unlock the lock cylinder on the Rhino Rack 2500 Series Legs #RRRLKVA, then you will want to drill out the center of the locks just enough to remove them. You can then install a new set of locks…

view full answer...

Answer 4

If you need replacement keys the part you need is the Rhino-Rack Masterkey Lock Barrels - Keyed Alike - Qty 2, part #RRRK***-2, with the key number inserted. Your lock core is 012 you need part #RRRK012-2. Unfortunately, you have to get the entire…

view full answer...

Answer 5

The replacement key you'd need is the part #THKEYN006 since the lock core number is 006.

view full answer...

Answer 6

Based on the info in our system, it looks like you are looking for the wrench to go with the Rhino-Rack 2500 system. For this system, you will want the Replacement Rhino Rack Security Allen Key - Long #SECKEY-L.

view full answer...

Answer 7

The Rhino-Rack Masterkey Lock Barrels #RRRK001-2 are not compatible with the Thule One-Key System Lock Cylinders #TH450200. You will have carry separate keys for your Rhino-Rack crossbars and Thule Accessories.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Removing Locked Rhino-Rack Lock Core Number 012 Without a Key

Product Page this Question was Asked From

Continue Researching