Replacement Lead Landing Gear Leg Recommendation for Trailer with Leg Marked VMC900R

Question

Question:

I need to replace the lead landing gear on my 5th wheel. The cap on the leg says VMC900R-511644A. It’s 29 1/2”. I’ve been looking at your Q and A’s and it appears I need a LC119102 or possibly a LG 179013. Which one do I need and what’s difference? The LC119102 is twice the price! Thanks

asked by: Ken H

1

Helpful Expert Reply:

Essentially the two jack legs are the same and either would work. Since the price is better the one I would go with is the part # LG-179013 which is the 29-1/2 inch length that you need.

expert reply by: Jameson C

1

Answer 1

Landing gear lead leg #LC119102 has bracket stops places on the opposite side of the shaft. Lead leg #LG-179013 is a universal option and has bracket stops on both sides. So if you want you can use the universal leg.

view full answer...

Answer 2

You have Venture landing gear on your 2008 Komfort 5th wheel trailer. Lippert landing gear lead leg #LC119102 can be used on your trailer if the measurements match up to what you need. The outer tube on this leg is 29-1/2 inches (including the cap).…

view full answer...

Answer 3

The correct replacement for your Venture VMC900R RV landing gear are part #LC119102 for the lead leg or #LC119101 for the follow leg. These will be direct replacements for the current legs you've got.

view full answer...

Answer 4

The Lippert replacement leg part #LC119102 that you referenced is the correct replacement for your Venture landing gear VMC900R.

view full answer...

Answer 5

The Replacement Lead Leg #LC119102 will fit your Venture VMC900R landing gear. We also have the Follow Leg #LC119101 available if you wish to replace them both. The Leg #LC179013 you found is for LCI Power Landing Gear assemblies.

view full answer...

Answer 6

The Replacement Lead Leg for Venture 5th Wheel RV Landing Gear part #LC119102 should be correct for a 2004 Komfort 5th Wheel Trailer. The outer tube measures 29-1/2" long which I am confident is what you have since it's an industry standard…

view full answer...

Answer 7

I would be happy to help you find replacement legs for your 5th wheel. You are going to want the Replacement Lead Leg item #LC119102 which will work well as a replacement for your Venture VMC900. Then for the matching follow leg you are going to want…

view full answer...

Answer 8

Yes, for your landing gear leg that has a sticker that says VMC900R the part #LG-179013 is the correct replacement lead leg.

view full answer...

Answer 9

I recommend replacing your lead leg with one that has the same dimensions as your new follow leg, the Replacement Lead Jack w/ Drop Leg #LG-179013. This leg is 29-1/2" long, 2-1/2" wide, has a 4,000 lb weight capacity and can be used with…

view full answer...

Answer 10

It is likely that replacement lead leg #LG-179013 for Stromberg Carlson landing gear will fit your Venture landing gear. Both are made by Lippert and this leg works with most brands including Atwood, Lippert, and Venture like what you have.

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to stress…

view full answer...

Replacement Lead Landing Gear Leg Recommendation for Trailer with Leg Marked VMC900R

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching