Could B&W Turnoverball Adapter for Trailers with Inverted Gooseneck Hitches Tow 5th Wheel Trailer

Question

Question:

can i haul fifth wheel with it?

asked by: Daniel

0

Expert Reply:

If your fifth wheel trailer had an inverted gooseneck hitch ball installed on the pin box yes, the part # BWGNXA4025 would work well but that's a pretty rare setup so this may not be what you are looking for.

expert reply by: Jameson C

0

Answer 1

Thanks for the picture! That is exactly what I need to confirm what pin box your Forest River Shasta Phoenix 28RB has. I just spoke with my rep at Lippert and you have a 1621 pin box with an 18,000 lbs capacity. You will want the Gen-Y Hitch 5th…

view full answer...

Answer 2

A Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item #GY73FR is not going to move your trailer closer to your Dodge Ram and if it does it won't be a significant amount. The cushioning of this setup will greatly reduce shock to your…

view full answer...

Answer 3

B&W Turnoverball Adapter #BWGNXA4025 is designed to fit in the B&W gooseneck trailer hitch in the truck bed and couple to a trailer that has the ball welded on instead of a coupler. It would not work to tow a 5th wheel trailer but you can use…

view full answer...

Answer 4

The B&W Turnoverball Adapter for Trailers with Inverted Gooseneck Hitches #BWGNXA4025 has an inside diameter sized to accept a 2-5/16-inch inverted-hitch gooseneck ball. It fits into the square opening of the B&W Turnoverball under-bed…

view full answer...

Answer 5

The Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter #DM8550045 that you referenced has an offset of 3 inches which would give you 3 more inches of turning clearance than what you have now.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 10

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 11

Thanks for the pictures and information! I just heard back from my contact at Lippert and your 2024 Keystone Cougar has a 1621 pinbox. You will need the Gen-Y Hitch 5th Wheel to Gooseneck Pin Box item #GY58GR you were looking at. You will also need…

view full answer...

Answer 12

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Could B&W Turnoverball Adapter for Trailers with Inverted Gooseneck Hitches Tow 5th Wheel Trailer

Product Page this Question was Asked From

Continue Researching