Replacement Straps for the Karrite Voyager Rooftop Cargo Box

Question

Question:

Looking for Replacement Straps for the Voyager KarRite Rooftop carrier... I have the rooftop brackets on the carrier itself but no Straps. I want to make sure I get the right Straps for this carrier..

asked by: Daniel S

0

Expert Reply:

I have a possible solution for you, however the exact straps for the Karrite Voyager are no longer available.

I recommend replacing them with a set of Thule Multipurpose Locking Straps, part # TH832, which are locking i10' long straps that have integrated locks for added security.

Thule also offers a smaller kit that is part # 10169, which you'll need two of to replace the straps.

expert reply by: Jacob W

0

Answer 1

The Karrite Voyager was a distant relative to the current Thule Sidekick Cargo Box #TH78GC. The box uses standard U-bolt hardware to attach to roof rack crossbars and tightens down with the included plates and threaded knobs. I have attached the…

view full answer...

Answer 2

The correct replacement key for your Karrite Cargo Box is the Replacement Key for Thule and SportRack Racks and Carriers part #THKEYN2806. We do ship to Canada and the cost to do so will be shown on the page just prior to checkout.

view full answer...

Answer 3

To mount your Karrite Voyager Roof Box to the crossbars on your vehicle your best bet is going to be with the Replacement Hardware Kit #TH05603. The exact/original hardware for the Voyager is no longer available but the plates and U-bolts included…

view full answer...

Answer 4

We have exactly what you need! To replace the key for the 2818 lock core on your Karrite Voyager Cargo Box you just need the part #THKEYN2818. This will work perfectly with your existing box. It will come with 1 key so you may want to order a couple…

view full answer...

Answer 5

For the old Karrite Voyager cargo box you would use replacement latch #03347. The replacement locks and keys, #SR03807, should also be the correct fit for the box. For the hinges, replacement parts are not available. If they are not moving freely…

view full answer...

Answer 6

We do carry replacement keys for various cargo boxes. If the number you provided for your Karrite Voyager Cargo Box is 2874, then the replacement key we offer would be part #THKEYN2874.

view full answer...

Answer 7

If you are asking what mounting hardware replacement kit will work for an old Karrite XL Voyager, then you should be able to use the Replacement Hardware Kit for Searsbox Cargo Box, part #TH05603. Many of these older cargo boxes no longer have…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...