Recommended Roof Rack Components Compatible With Leer Topper with Rail Tracks

Question

Question:

I have a Leer Topper on my 2013 f 150, it has the built in tracks to support a thule tracker ii I was told. can you give me all that I need to order these?

asked by: Wesley W

0

Expert Reply:

For your 2013 Ford F-150 with Leer Topper you can use the Thule Podium Roof Mounted Foot Pack # TH460R along with the fit kit # THKIT3101. Then you can use aero bars like # TH711520 or SquareBar # TH712500.

An alternative option is the discontinued Thule Tracker II Foot if you have them along with the foot base # 753-2149. Then you can use the discontinued square load bars if you already have them.

To lock your roof rack feet, I recommend the Thule One-Key System Lock Cylinders - Qty 4 # TH450400. This will deter theft.

expert reply by: Jason S

0

Answer 1

According to Thule, at one time they did the OEM roof racks for BMW/Mini, but that's been several years ago so they can't provide any information on anything more recent than 8 or so years ago. The good news is that I can simply provide you…

view full answer...

Answer 2

The width of the head on the Replacement M6x35 Square Head Bolt for Thule OutRide, ProRide, ProRide XT, UpRide Bike Racks - Qty 1 #TH33RV is 3/4 of an inch.

view full answer...

Answer 3

The Replacement Square Nut #853-7557 is sold individually.

view full answer...

Answer 4

This part number is a replacement part for a rack setup that fit the Leer camper tracks. Do you have a Thule Tracker setup currently or are you looking for a setup to fit the channels?

view full answer...

Answer 5

Yes, the Replacement Cover for Thule Tracker Half Foot Packs part #853-7084 will fit both the Thule Tracker TK1 and Thule Tracker II TK2 systems. The covers are super easy to install as they just snap into place. They are also rather important as…

view full answer...

Answer 6

According to Rhino-Rack, their M8 x 16.5 #RR72XB T-bolts are meant to fit in the top channel of their crossbars. For the tracks, you'd want to use #RRQMFK11 which are compatible with the Rhino-Rack roof tracks. The Rhino Rack #RLTF leg kit would…

view full answer...

Answer 7

I pulled a Replacement Square Nut #853-7557 from our warehouse and found that its dimensions were .79 by .79 of an inch and .17 of an inch thick. Check out the video I took that shows these dimensions.

view full answer...

Answer 8

The Replacement Track Nut for Thule Tracker II Half Foot Pack or Tracker Fit Kits TK6, TK8, TK9 #853-2106 has the following measurements: Thickness - .16 inches Long Sides - .993 inches Short Sides - .447 inches Width - .47 inches Long Point to Long…

view full answer...

Answer 9

Instead of using the M8 T-Bolt #853-5715 for the Side Rails for Retrax XR Series Hard Tonneau Covers #RTT-82383 you can use the Square Nut #853-7557 instead. This has the same dimensions as the T-Bolt head section but this has threads for an M6 bolt…

view full answer...

Answer 10

The Replacement Pocket Nut for TracRac SR Sliding Ladder Rack Base Rails part #TA01-2100N measures 1-3/4" long x 1" wide x 1/4" thick.

view full answer...

Answer 11

We have a similar Thule roof rack setup that does fit the flush rails you have on the roof of your 2018 Ford Explorer but the #753-2149 is not what you need. Instead the kit you'd need is the part #THKIT3151 which fits the flush rails and allows…

view full answer...

Answer 12

Yes, you are correct that the #753-2149 is the correct part for your Tracker II rails on your truck. A set of 4 of these will work great for your Tracker feet. To complete the TK1 kit you will need: qty 4 of the base #753-2149 qty 4 of the cover…

view full answer...

Recommended Roof Rack Components Compatible With Leer Topper with Rail Tracks

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching