Mounting Hole Spacing for Trailer Fender Mounting Brackets # CE26065PGA

Question

Question:

Michael H, you replied to my question about a different bracket, that is not the bracket I asked about! I asked about bracket CE26065PGA. Hole spacing for fender mount brackets CE26065PGA.

asked by: Peter H

0

Expert Reply:

The Mounting Brackets for Trailer Fenders # CE26065PGA are indeed spaced 2-1/2 inches apart on center like you are looking for. You can see this, and other measurements, in the video I have linked below for you.

expert reply by: Michael H

0

Answer 1

The recommended mounting brackets you need for use with the Fulton Single Axle Trailer Fender #F008550 that you referenced is the #CE26065PGA.

view full answer...

Answer 2

Yes, the install brackets part #CE26065PGA can be used with the Fulton fender part #F008559 that you referenced. The great thing about these brackets is how universal they are. And that will easily work with the Fulton fender you have. If you flip…

view full answer...

Answer 3

I have a great solution for you. Unfortunately, the Mounting Brackets for Trailer Fender - 8" to 12" Wheels #CE26065PGA will not fit for mounting your Fulton Single Axle Trailer Fender with Top and Side Steps 008582. However, the parts that…

view full answer...

Answer 4

The Fulton Plastic Fender with Top Step, part #F008551, is designed to be mounted with your existing hardware, or mounted with brackets designed that are specific to the trailer frame on which they would be installed. No mounting hardware is…

view full answer...

Answer 5

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 6

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 7

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 8

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install…

view full answer...

Answer 11

Yes, the Solera Slide Topper part #LCV000168106 is the correct fit for your flange width of 90-1/2 inches. This specific model has a box width range of 86 to 91-3/4 inches which is perfect for your width listed.

view full answer...

Answer 12

Replacement arms are available for the Roadmaster EZ5 Base Plate Kit #RM-521569-5 for your 2015 Honda Fit with the part #RM-ARMS. When the original base plate brackets and arms were manufactured, they were made as one part. To be sure that the new…

view full answer...

Mounting Hole Spacing for Trailer Fender Mounting Brackets # CE26065PGA

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching