Replacement Axle Recommendation for Yachtclub Snowmobile Trailer Rated for 1,880 Pounds
Question:
I have a Yachtclub snowmobile trailer and the axle is pretty rusted/rotted and lo, oking to replace it. The trailer is Model SMA 105D, mfg in 2003, VIN 4H101141940352337, GAWR is 1880 lbs and its a torsion style axle that bolt up into the support beams that run axially along the trailer.
asked by: Pete J
Helpful Expert Reply:
For your snowmobile trailer I recommend going with a Timbren Axle-Less system such as # ASR2000S01. I have included a link to all the options rated for 2,000 pounds. The benefit is that you won't have an axle beam to rust and you still get the rubber, torsion-style suspension. To determine if the hubs you have now will fit I just need to know the inner and outer bearing numbers stamped into the sides of the bearings.
Products Referenced in This Question
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 2,000 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Product Page this Question was Asked From
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 2,000 lbs
- Search Results: snowmobile trailer axle
- Video: Timbren Axle-Less Trailer Suspension System Test Course
- Search Results: axle
- Shop: 4-Leaf Slipper Spring w/ Flat End for 3,700-lb Trailer Axles - 30" Long
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Shop: 4-Leaf Slipper Spring w/ Hook End for 5,000-lb Trailer Axles - 26-5/8" Long
- Shop: 3-Leaf Slipper Spring w/ Flat End for 2,900-lb Trailer Axles - 30" Long
- Shop: 5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles - 27" Long
- Q&A: Replacement Axle Needed for a Yachtclub 10X101 Aluminum Tilt Snowmobile Trailer
- Shop: Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Search Results: trailer drop axle
- Q&A: Leaf Spring Recommendation for 2,200 lb Snowmobile Trailer
- Video: Review 2 of Dexter Axle Trailer Axles - Leaf Spring Suspension - 7359765
- Search Results: torsion axel
- Search Results: torsion axel for trailer
- Search Results: torsion axel trailer
- Q&A: Replacement Tire and Wheel for a Leland Trailer with 16.5X6.5-8 Tires and 4 on 4 Inch Bolt Pattern
- Video: Review of etrailer 4 Leaf Slipper Spring - e89SR
- Video: Review of Trailer Leaf Spring Suspension - Spring Mounting Hardware - 166079
- Q&A: Replacing Damaged Axles and Spindles on a Yacht Club Trailer
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: overslung
- Q&A: Should You Completely Cover Wood on Bunk Boards with Marine-Grade Carpeting or Leave Wood Exposed
- Q&A: Replacement 1/2-20 Wheel Stud For Reliable 1206 Trailer Hub
- Q&A: Could/Should Zerk Fitting of EZ Lube Spindle Be Removed to Install Bearing Buddies
- Video: Review of etrailer by AxleTek Trailer Axles - 2,000 lbs 60 Inch Long Axle with Idler Hubs - e84YR
- Video: Review of Optronics Trailer Lights - Red LED Clearance Light or Side Marker Light - OPT53FR