Functions of Wire Colors on Miro-Flex Clearance Light part # MCL48AB

Question

Question:

Miro-Flex LED Trailer Side Marker Light and Mid-Ship Turn Signal - Submersible - Amber Lens Item # MCL48AB I seem to having with the video and transcript does show. Red, white and black wires. Which is ground?

asked by: Bill

0

Expert Reply:

For the Miro-Flex part # MCL48AB the white wire is ground, the red wire is stop/turn, and the black wire is the running light circuit.

expert reply by: Jameson C

0

Answer 1

The Trailer Clearance and Side Marker Light #MCL48AB uses a three wire setup which means that the light has two light intensities. A lower intensity for the running light circuit and a brighter intensity that will come on when the brakes or turn…

view full answer...

Answer 2

Yes, you are absolutely correct. To wire up the Miro-Flex LED Trailer Side Marker Light #MCL48AB to work as a blinker and running light you would need to run the stop/turn signal wires to the red wires, the running lights to the black wires and the…

view full answer...

Answer 3

When installing the Optronics #MCL48AB as a blinker/turn signal you will connect the white wire to the ground wire as you've noted. You will then connect the red wire to the turn signal circuit for that side of the trailer and the black wire will…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 8

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 9

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 10

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 11

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 12

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...