Trailer Hitch Fit Recommendation for 2018 Kia Sportage GT with Dual Exhaust

Question

Question:

Will a 76074 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame work with a sportage GT Line 2018 dual exhaust

asked by: Candido C

1

Helpful Expert Reply:

I checked with the manufacturer and the etrailer # e72TR is listed as fitting all models of the 2018 Kia Sportage so it would also fit your model that has dual exhaust too.

expert reply by: Jameson C

1

Answer 1

I personally like the Curt Hitch #C13281 over the etrailer #e72TR for your 2022 Kia Sportage because the safety chain loops sit out to the side on the Curt but they sit under the receiver for the etrailer which means you'll have less ground…

view full answer...

Answer 2

I would not take your vehicle back to the welding/muffler/tow hitch shop you visited. The etrailer Hitch #e72TR you mentioned is confirmed to fit your 2021 Kia Sportage EX All Wheel Drive so I am not sure where they are getting their information.…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches.…

view full answer...

Answer 11

The best hitch for a 2024 Kia Sportage is the Curt Hitch item #C94WR. This hitch is custom fit and bolts to your Sportage with included hardware. It is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 525 lbs…

view full answer...

Answer 12

Hey HPA, I would go with the Air Lift kit part #AL64VJ that fits your 2019 Toyota RAV4 based on what you described and your needs. This gives you adjustable support that you can tailor as needed so that you get the exact amount of support you need…

view full answer...

Trailer Hitch Fit Recommendation for 2018 Kia Sportage GT with Dual Exhaust

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching