Is Valterra Water Hose W01-1800 White or Clear?

Question

Question:

Is this hose clear or white?

asked by: Tom

0

Expert Reply:

I went to the warehouse to take a look at the Valterra Reinforced Hose # W01-1800 just to confirm that the hose is white. It is made from PVC, has a 5/8" outer diameter, a 1/2" inner diameter and is 50' long. I've added a link to a video review for you to take a look at.

expert reply by: Kyle S

0

Answer 1

A kink is possible for really any PVC tubing hose, including the Valterra Braided PVC Tubing for RV Fresh Water - 50' Long - 1/2" ID x 5/8" OD #W01-1800. That said, the reinforced braided tubing of the #W01-1800 will…

view full answer...

Answer 2

For the Valterra Braided PVC Tubing for RV Fresh Water - 50' Long - 1/2" ID x 5/8" OD - 73 F #W01-1800, the manufacturer offers the following: Valterra Male Adapter - 3/8" MPT x 1/2" Barb - Polypropelene…

view full answer...

Answer 3

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to where…

view full answer...

Answer 4

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...

Answer 5

In regards to the Roadmaster Exact Center Steering Stabilizer part #RM47MR, the stabilizer installs on the front of the steering arm pointed down. I have attached a photo of this below. If this wasn't what you were looking for, please just let me…

view full answer...

Answer 6

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

view full answer...

Answer 7

The Roadmaster #RM-1139-140 and #RM-1139-148 are both replacement anti-sway bars for a Ford F550 or F53 Class A motorhome chassis. Both bars are 1-3/4 inches in diameter. The #RM-1139-140 fits models with a GVWR of 22K-24K, and the #RM-1139-148 fits…

view full answer...

Answer 8

For a 2023 Entegra Odyssey 24B on a Ford E-450 chassis you would need the Roadmaster Front Anti-Sway Bar - 1-3/8" Diameter #RM-1139-189 and rear #RM-1139-147. If you also wanted to add in a steering stabilizer then you'd need the Roadmaster…

view full answer...

Answer 9

We have the Roadmaster Exact Center Steering Stabilizer part #RM47MR that fits your 2021 Jayco Greyhawk 27U that has an OEM factory damper and would work really well to improve handling.

view full answer...

Answer 10

The Roadmaster Rear Anti-Sway Bar for Motorhomes #RM-1139-143 can use your factory u-bolts if they are long enough. If they are not, then Roadmaster recommends using the 7/8 inch diameter u-bolts that are longer (most likely the larger diameter due…

view full answer...

Answer 11

To replace/upgrade the bushings on the rear factory sway bar of your 2009 Class A Newmar Canyon Star RV you need one of the following Roadmaster kits based on the diameter of your factory sway bar: - 1-3/8" Diameter #RM-4139-300 - 1-1/2"…

view full answer...

Answer 12

For your Dometic 9000 awning, I recommend you take a look at the: -Solera Smart Arm 12V Power RV Awning Conversion Kit #LC434724 for white, Or -Solera Smart Arm 12V Power RV Awning Conversion Kit #LC434723 for black. Either of these kits will work…

view full answer...

Is Valterra Water Hose W01-1800 White or Clear?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching