Which End Faces Forward When Installing a Slipper Spring
Question:
Open eye leaf forward or in the rear also can or should shackles be used
asked by: Mike
Expert Reply:
When installing a slipper spring, like the 2-Leaf Slipper Spring # e29SR, you will install it so that the end with the eye is oriented towards the front of the trailer and the open end is facing the rear part of the trailer.
You will need to use hangers when installing slipper springs and avoid shackle straps. Since one end of the slipper spring is open and not "fixed" it will not sit properly if shackle straps are used.
I have attached a helpful article that goes into detail about what parts are needed and how to install slipper springs.
Product Page this Question was Asked From
2-Leaf Slipper Spring w/ Flat End for 1,800-lb Trailer Axles - 30" Long
- Trailer Leaf Springs
- Slipper Springs
- Flat End
- 1800 lbs
- 1-3/4 Inch Wide
- 2 Leaf
- 30 Inch Long
- Painted
- etrailer
more information >
Continue Researching
- Shop: 2-Leaf Slipper Spring w/ Flat End for 1,800-lb Trailer Axles - 30" Long
- Search Results: slipper springs
- Search Results: leaf springs
- Search Results: 9163b
- Video: Review of Trailer Leaf Spring Suspension - Spring Mounting Hardware - 166079
- Video: Universal Group Trailer Suspension - Leaf Spring Suspension - SP-177275 Review
- Video: Review of etrailer 3 Leaf Double Eye Spring - e84SR
- Video: CE Smith Trailer Suspension - Leaf Spring Suspension - CE14016G Review
- Shop: CE Smith Front Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1
- Search Results: trailer leaf springs
- Shop: CE Smith Spare Tire Mount for Trailers - Steel - 4- and 5-Lug Wheels - 8-3/8" Long
- Article: How to Tell the Weight Rating of a Trailer Axle
- Shop: Shackle Bolt For Double-Eye Springs - 9/16" Diameter - Plain - 3" Long
- Shop: 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
- Shop: BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Q&A: Will Overrated Slipper Springs Cause Rigid Ride
- Video: Review of etrailer 2 Leaf Slipper Spring - e29SR
- Q&A: Which Way Do Slipper Springs Face on a Trailer
- Q&A: Are Trailer Leaf Spring Shackles Supposed to be Angled or Totally Straight
- Search Results: leaf spring
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Brake Controller
- Video: Choosing the Right Trailer Wiring
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector