Contents of Erickson Ratchet Strap Kit

Question

Question:

Is the price for one strap or a pair ?

asked by: Dave

0

Expert Reply:

Part # 08504-05 is a kit with one Ratchet Strap and one Axle Strap.

expert reply by: Jacob W

0

Answer 1

To secure your Jeep to the metal deck of your car hauler, I recommend taking a look at the Erickson Car Tie-Down Kit #08504-05. These straps feature twisted flat hooks that will help to keep the strap straight and flat along with axle straps to…

view full answer...

Answer 2

Thanks for your pictures! That's what Wranglers are meant for. At 4500 pounds, the weight of the secured cargo would exceed the combined safe working load limit of 1,100lbs per tire of the straps being used on the Erickson E-Track Tie-Down…

view full answer...

Answer 3

The Erickson Car Tie-Down Kit - Twisted Flat Hooks and Axle Strap w/ Ratchet #08504-05 comes with one tie-down strap and one axle strap.

view full answer...

Answer 4

We do have a car tie-down kit from Erickson that is very similar to the one you referenced, though the Erickson Tie-Down with the Multiplier Ratchet and Swivel Hook is no longer available. Instead, I recommend the Erickson Car Tie-Down Kit with…

view full answer...

Answer 5

The heaviest model 2006 Chevy Equinox weighs just under 4,000 pounds, so if you use at least four of the Erikson Car Tie-Down Straps, #08504-05, you should be fine. The straps have a maximum capacity of 10,000 pounds and a safe working load limit…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey James, so the thickness of the Small Coin Vinyl flooring #TS97FR that you referenced is 90 mil thickness.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

I recommend using the 601 Flooring Adhesive in a 1 Gallon #TS76FR or 4 Gallon #TS26FR depending on your application. The 601 does not have the pressure sensitive requirements of the 801, 1 Gallon #TS86FR and 4 Gallon #TS58FR adhesives.

view full answer...

Answer 10

The spring hanger placement is going to be determined by your axle spacing. For example, if your axles are spaced 33 inches apart, as shown in the attached diagram, a 7K axle slipper spring, like #e74SR, requires a distance of 28-1/2 inches between…

view full answer...

Answer 11

To install the Small Coin Pattern Vinyl Flooring #TS97FR with the RV Flooring Adhesive #TS76FR you just need to make sure that your trailer floor is a bare wood so you have the best bonding of the adhesive as possible. Be sure to sweep it out really…

view full answer...

Answer 12

You can use either of the adhesives for permanently installing the Small Coin Pattern Vinyl Flooring #TS37FR to your utility trailer: - Vinyl Over Wood #TS76FR - Vinyl Over Wood, Metal, or Concrete #TS86FR Both options come in a Gallon tub and…

view full answer...

Contents of Erickson Ratchet Strap Kit

Product Page this Question was Asked From

Continue Researching