bing tracking image
Q & A Icon

Troubleshooting Lippert Ground Control 2.0 Leveling System Error Code  

Question:

The camper has an error code LF. We have retracted the all four leveling systems 6inch and retracted as well as pushed the the Error code on the system box and push retract. And did a manual retract. However, we still have the error code LF. can you explain why.

0

Expert Reply:

There are a couple of things as I talked with my contact at Lippert. You will need to follow this system perfectly of the error will not clear. You need to extend the front jacks 6 inches, then the rear jacks 6 inches, and then press and hold the retract button until the jacks are all retracted. This should clear the error.

If it does not, then use a multimeter like # PT89ZR check to make sure that left front jack is getting the proper battery voltage. If it is under 12V then it will continue to trip that error code. If it is getting the 12V or more voltage, then that jack may simply need to be replaced. You would need the motor # LC343758 or the complete Replacement Lead Leg for Lippert Components Ground Control 3.0 Electric Leveling System - Qty 1 # LC305340.

expert reply by:
0
Jason S

Products Referenced in This Question



Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>