Follow Leg Landing Gear Repair Kit Recommendation for 2006 Keystone Sprinter Copper Canyon

Question

Question:

I have an 2006 Keystone Sprinter Copper Canyon 294FWDB. My follow Jack broke. Which repair kit do I need to purchase? Thank you in advance.

asked by: William H

0

Expert Reply:

Most of the Keystone trailers came with Lippert landing gear so for a replacement follow leg repair kit you'd want the part # LC146060.

Double check to make sure you have Lippert, Venture, or Stromberg brand landing gear. If so, this would be the kit you need. If you have something different let me know.

expert reply by: Jameson C

0

Answer 1

The landing gear looks like a standard set based on the pictures and the dimensions you listed. The part #LC146060 would be what you need for the follow leg and then part #LC146059 for the lead leg.

view full answer...

Answer 2

The Lippert Components Venture Follow Leg Repair Kit for 5th Wheel RV Landing Gear #LC146060 is what you need for your follow leg. I've attached a photo to assist.

view full answer...

Answer 3

The lead jack is typically the one with the hand crank and motor attached to it. For your Venture VMC900R landing gear setup you will want to go with Lead Jack Repair Kit for Stromberg Carlson Landing Gear #LG-146059.

view full answer...

Answer 4

I linked the schematic diagram for Lead Jack Repair Kit #LG-146059 taken from the written instructions. The complete instructions will be sent to you in a separate link. The follow leg repair kit is part #LC146060 in case you need it.

view full answer...

Answer 5

Repair kit #LG-146059 contains 2 pins and the drive shaft all of which are for the top of the jack. To help I have included the written instructions below and also a diagram that points out the parts mentioned in the written instructions. The…

view full answer...

Answer 6

Thank you for the photo but trailer manufacturers do not keep any type of database with specific part numbers that we can access; even if they did it would not be a guarantee that the parts would be the same on a trailer that was made 20 years ago.…

view full answer...

Answer 7

You might be able to find a sticker on either leg that will tell you who the manufacturer is and what the part number is for the leg as well. If you aren't able to find that then you can try reaching out to Forest River with your VIN to see if…

view full answer...

Answer 8

Thanks for the picture of the trailer wiring connector you have. Based on that you are in need of a 7-way blade extension like the part #C56080 for a 7 foot long extension or part #HM20049 for an 8 foot long extension. Or if you are looking for…

view full answer...

Answer 9

It sounds like you're trying to replace the motor on your Kwikee steps with the part number 366043, and we have just what you're looking for. In order to replace the motor for these steps you'll want to use the Replacement Motor for…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 12

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Follow Leg Landing Gear Repair Kit Recommendation for 2006 Keystone Sprinter Copper Canyon

Product Page this Question was Asked From

Continue Researching