Air Bag Suspension Kit Recommendation for 2011 Ford F-250 With Curt Hitch

Question

Question:

Have 2011 f250 6.7 with Curt rail system no drilling. What air suspension will work with this set up with no drilling or big modifying ?

asked by: Tom

1

Helpful Expert Reply:

The Firestone air bag kits like the # F2597 are designed to work with in-bed hitches installed so this would be your best option. This is a confirmed fit for your 2011 Ford F-250 short bed as well.

expert reply by: Jameson C

1

Answer 1

Yes, the Air Lift LoadLifter 5000 Ultimate Air Springs #AL88396 will work on your 2016 Ford F-250 with the B&W Turnover Ball #BWGNRK1111 installed. I recommend using the Air Lift WirelessAIR Compressor System #AL74000EZ to inflate your air…

view full answer...

Answer 2

I checked with Curt and can confirm for you that the Curt Trailer Hitch #C15810 will work with your 2010 Ford F-250 or F-350 Super Duty King Ranch that has a Ranch Hand Bumper. Please note that spare tires larger than 20" will not be able to…

view full answer...

Answer 3

The drop of the Curt Class V #C15810, which is the distance from the top of the hitch crossbar to the underside of the vehicle frame where the hitch mounting flanges attach to the vehicle is 5.63 inches. The distance from the face of the receiver…

view full answer...

Answer 4

During my research, I found the Super Duty towing guide through the Ford Fleet website. As you've found, it's pretty difficult to definitively determine the exact tow capacity of a truck because there's so many variables involved. The…

view full answer...

Answer 5

There are two sizes of hitches you can install on your 2011 Ford F-250 Super Duty Diesel. There is a 2-inch receiver hitch and a 2-1/2 inch receiver hitch. The towing capacity on a 2011 Ford F-250 Super Duty Diesel will range from 12,500 lbs to…

view full answer...

Answer 6

The air bag capacities do not factor in the weight of the truck because presumably the stock components on the truck are still handling that weight. So think of it more like any additional weight you are adding and go from there (keep in mind that it…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Air Bag Suspension Kit Recommendation for 2011 Ford F-250 With Curt Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching