Trailer Hitch Recommendation for 2011 Toyota RAV4

Question

Question:

Will the hitch on my 2005 Toyota Corolla fit my newer 2011 Toyota Rav4

asked by: John M

0

Expert Reply:

Toyota Corollas as RAV4s are very different vehicles and because of that they do not share the same hitch fits.

For your 2011 Toyota RAV4 what you would need is the etrailer part # e98864. I attached an install video for this for you to check out as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The etrailer Trailer Hitch Receiver #e98864 referenced in your question is confirmed to fit your 2012 Toyota RAV4 and is the exact hitch I would have recommended. When installing the hitch to your vehicle, you may just need to remove the plastic…

view full answer...

Answer 2

For the etrailer hitch part #E98864 that you referenced it's going to block a portion of the liftgate sensor of your 2018 Toyota Hybrid but what you can do is kick your foot to either side of the hitch tube and the liftgate will open like…

view full answer...

Answer 3

Your Honda CR-V has a 1500 lb towing capacity and 150 lb tongue weight capacity. There is really only one scenario I can think of where a class III hitch like the etrailer Trailer Hitch Receiver - Custom Fit - Class III - 2" #e98868 would…

view full answer...

Answer 4

The second hitch pin hole on the etrailer hitch part #e98864 that you referenced is not used. One is smaller than the others. The smaller hole it not used.

view full answer...

Answer 5

For your 2017 Toyota RAV4 the etrailer hitch part #e98864 is a confirmed fit and will be your best option. This is a Class III hitch with a 2 inch opening that will have plenty of capacity and will work great. I attached an install video for this…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

Yes, your kick sensor for your hands free liftgate will still work after installing a Class III receiver on your 2024 Toyota RAV4 XSE. I have linked an install video near the bottom of the page for our etrailer Trailer Hitch Receiver #e23ZR being…

view full answer...

Trailer Hitch Recommendation for 2011 Toyota RAV4

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching