Which Brake Controller Wiring Harness Fits a 2007 Dodge Ram 2500 and Voyager Brake Controller

Question

Question:

i had this model on a 2005 dodge 2500 pickup will the wiring harrness still work for my new 2007 dodge 2500?

asked by: Rich D

0

Expert Reply:

Yes it will. The Tekonsha Brake Controller Wiring harness, # 3020-P, will fit your 2007 Dodge Ram 2500. I have a list below that shows which vehicles will accept this wiring harness.

1995-2009 Dodge Ram 1500 Pickups
1995-2009 Dodge Ram 2500 and 3500 Pickups
1997-2011 Dodge Dakota Pickups (with OEM Tow Package)
1998-2009 Dodge Durango (with OEM Tow Package)
2007-2009 Chrysler Aspen (with OEM Tow Package)

I have also included a link to a video that shows, in part, the installation of this harness on a similar truck for you to view.

expert reply by: Michael H

0

Answer 1

I'd love to tell you yes, you can use the Hopkins part you mentioned, but that will not work for your 2022 Jeep Grand Cherokee L. That's a plug-in replacement 7-way and 4-way, and isn't compatible with wiring on your Jeep. There isn't…

view full answer...

Answer 2

Manufacturers change the wire colors on vehicles for seemingly no reason sometimes. Actually, the colors get changed because there is some engineering change that causes them to make wire color changes. Your truck must be one of the models that has…

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 8

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 9

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 10

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 11

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 12

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Which Brake Controller Wiring Harness Fits a 2007 Dodge Ram 2500 and Voyager Brake Controller

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching