Can Aluminum Lynx Trailer Wheel # LHSL311 be Used with Tire Pressure Sensors

Question

Question:

I pull with a 2017 ford f350 that monitors tpms sensors on the trailer wheels. Will the wheel sensors fit/work with these rims?

asked by: Andrew M

0

Expert Reply:

Depends on the sensor but the Aluminum Lynx Trailer Wheel # LHSL311 should work just fine as the sensors you mentioned are designed to work with standard trailer wheels like this. Most of them attach to the valve stems of the wheel which this wheel has a valve stem that's easily accessible.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I recommend the Dexstar Steel Spoke Trailer Wheel part #AM20522 as a replacement for a Forest River Salem 33BHOK.

view full answer...

Answer 2

Thanks for the photo! I do not have an exact match for the wheel you show, but we offer a very similar 15 x 6 wheel with a 6 on 5-1/2 bolt pattern. The Lionshead Lynx, part #LHSL311. This would be the closest thing we offer to the wheel you show.

view full answer...

Answer 3

As long as you are using a metal valve stem like the Americana Metal, Bolt-In Valve Stem #AM20906 that is rated for over 100 psi then you can definitely fill a tire with 110 psi when it is mounted on the Aluminum Lynx Trailer Wheel #LHSL311. Be…

view full answer...

Answer 4

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 5

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 8

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex…

view full answer...

Answer 9

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 10

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 11

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you,…

view full answer...

Answer 12

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights…

view full answer...

Can Aluminum Lynx Trailer Wheel # LHSL311 be Used with Tire Pressure Sensors

Featured Help Information

Miscellaneous Media

Continue Researching