Can the Ball Mount Included w/ Curt Trailer Hitch Towing Starter Kit be Used in Rise Position

Question

Question:

i bought the Curt starter towing kit the question is, is it safe to reverse it to raise...

asked by: Bill

0

Expert Reply:

Yes, the ball mount in the Curt Trailer Hitch Towing Starter Kit, item # C45534 can indeed be used in the rise position. When in the rise position, the ball mount provides a 3/4 inch rise.

expert reply by: Robert G

0

Answer 1

There is no set amount the nut needs to be tightened on a friction sway control bar like #83660. You will need to adjust it as needed. In the instructions, which I have linked for you. Reese states Trailer configurations and loading, road and weather…

view full answer...

Answer 2

Friction Sway Control Systems like the Reese #83660 use an adjustable-friction sliding bar mechanism to control trailer sway. This type of system is suitable for trailers with electric brakes and can be used with or without weight distribution (WD)…

view full answer...

Answer 3

The best trailer hitch we offer for a 2017 Subaru Outback with hidden design is the Draw-Tite Max-Frame Trailer Hitch Receiver part #76227. The Draw-Tite hitch installs behind the rear bumper so it will be the most hidden and the receiver tube is…

view full answer...

Answer 4

The Draw-Tite Hitch Receiver part #76227 on the 2019 Subaru Outback Wagon requires 4 inch by 4-1/2 inch square cut out on the bottom/center of the fascia. To find the center of the fascia measure 2 inches (toward the driver side of the fascia) from…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350 lbs…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Justin. To add a hitch to your 2024 Mistsubishi Outlander PHEV, I recommend the Curt item #C86FV. This hitch is custom fit and specially designed for the PHEV model of your Outlander. It is a class III hitch with a 2" receiver, that has a…

view full answer...

Answer 10

To add a hitch to your 2024 Subaru Outback, I recommend the etrailer Hitch item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity…

view full answer...

Answer 11

I checked with our vendors and there are no custom fit wiring harnesses for the 2024 Honda Pilot's which means you will have to use one of the two universal options available. I have listed both of the below: Curt Powered Tail Light Converter w/…

view full answer...

Can the Ball Mount Included w/ Curt Trailer Hitch Towing Starter Kit be Used in Rise Position

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching