Recommendation for a Lighter Weight Distribution System for Trailer with 350 Pounds Tongue Weight
Question:
I have the Curt 17300 WDH but the shank and head are so heavy I can barely lift them anymore. 75 years old Will the RP54998 fit the Curt. What is the weight of the RP54998. What is the spacing of the holes in RP54998. Our TT weighs 3200 lbs and tongue weight about 350 lbs. Can you suggest an alternate WDH with lighter weight shank/head assembly?
asked by: Neal R
Expert Reply:
Reese weight distribution shank # RP54998 and the one that comes with Curt weight distribution system, 17300 (discontinued), weigh about the same which is 20 pounds so you would not benefit from switching shanks. The various weight distribution heads also weigh about 20 pounds (not counting the ball) so really you are looking at a combined weight of around 40 pounds no matter which system you go with.
The Reese trunnion bar head, round on system # RP66020 is the lightest set up since the head is a little under 20 pounds. The shank and head will weigh about 35 pounds. With this system you can keep using the Curt shank that you already have as well as the ball.
Products Referenced in This Question
Reese Weight Distribution - No Shank - Trunnion Bar - 6,000 lbs GTW, 600 lbs TW
- Weight Distribution Hitch
- WD Only
- No Sway
- Shank Not Included
- Electric Brake Compatible
- Fits 2 Inch Hitch
- 300 lbs
- 400 lbs
- 500 lbs
- Reese
more information >
Product Page this Question was Asked From
Reese Weight Distribution Shank - 16,000 lbs
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 2 Inch Drop
- Trunnion - 2 Inch Drop
- Round - 7 Inch Rise
- Trunnion - 8 Inch Rise
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Curt MV Weight Distribution System w/ Friction Sway Control - Round Bar - 10K GTW, 1K TW
- Shop: Reese Weight Distribution - No Shank - Trunnion Bar - 6,000 lbs GTW, 600 lbs TW
- Video: Reese Weight Distribution - WD Only - RP66020 Review
- Video: CIPA Dual-View Clip-on Towing Mirror Installation - 2020 Jeep Gladiator
- Video: Reese Weight Distribution without Shank Review
- Shop: 2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Shop: Performance Tool Vehicle and Trailer Aligner - LED and Yellow Ball
- Shop: CIPA Universal Dual Lens Towing Mirrors - Clip On - Qty 2
- Shop: Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 10,000 lbs GTW - Without Shank
- Shop: Blue Ox TrackPro Weight Distribution w/ Sway Control - 7-Hole Shank - 6K GTW, 600 lbs TW
- Shop: Roof Rack
- Shop: Towing Mirrors
- Q&A: Weight Distribution System for a 2004 Ford F-350 Towing a Travel Trailer
- Search Results: a~90
- Article: RV Sway Control, Stabilization, and Suspension Enhancement
- Q&A: Cover Recommendation for Riverside Retro 166 Trailer
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 68149
- Q&A: Can Hydraulic Brakes of Demco Tow Dolly be Converted to Electric Brakes
- Video: Choosing the Right Brake Controller
- Shop: Brake Controller
- Article: 5 Things to Know About Weight Distribution Hitches
- Search Results: 25580
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome