Does Under Body Panel Get Trimmed or Removed to Install Trailer Hitch on a 2015 Ford Fusion

Question

Question:

Tech Tip Underbody panel must be trimmed and reattached for Fusion Energi to protect the battery compartment. No drilling required for installation , Underbody panels must be permanently removed for hitch installation. This is very confusing. Please send diagram or pictures of what this means.

asked by: Gerald D

0

Expert Reply:

That is a confusing series of notes for Curt trailer hitch # C12091 and the 2015 Ford Fusion. Basically, the instructions call for the removal of a fascia piece. But it is possible to trim it and reinstall it hence the contradictory notes. I have linked the instructions for you as well as a video showing an example installation. I would just leave the panel off because the hitch is basically taking its place.

expert reply by: Michael H

0

Answer 1

We do not publish the torque specs for the hardware used in the hitch installations because the hitch manufacturers will occasionally change the hardware included with the hitch which in many cases will change the proper torque spec. Therefore, we…

view full answer...

Answer 2

A class II trailer hitch, the Curt Trailer Hitch Receiver part #C12091 is a far better option to use on your 2016 Lincoln MKZ Hybrid even for carrying bikes with a hitch mounted bike rack. The reason for this is that it can 1) allow you to carry more…

view full answer...

Answer 3

The EcoHitch Hidden Trailer Hitch Receiver part #306-X7239 is a great option for a 2016 Ford Fusion. It has the larger 2" receiver tube opening which will greatly expand the variety of hitch mounted accessories to choose from. The EcoHitch…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

Hi Alec, The Inno Kayak Roof Rack w/ Tie-Downs #INA452 needs a 28" minimum spread so that the saddles sit at the right spot for the kayak and support the weight properly. This is probably just a general guide from Inno though because the length…

view full answer...

Answer 11

E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck bed,…

view full answer...

Answer 12

Generally speaking bearing grease has so little water in it that significant expansion due to freezing temperatures is unlikely. Higher operating temperatures within the hubs while underway would potentially thin the grease but again not cause much…

view full answer...

Does Under Body Panel Get Trimmed or Removed to Install Trailer Hitch on a 2015 Ford Fusion

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching