EcoHitch Hidden Trailer Hitch Installation - 2016 Ford Fusion Video

There is one trailer hitch with a 2 inch receiver that fits your 2016 Ford Fusion, which is from EcoHitch: - EcoHitch Hidden Trailer Hitch Receiver #306-X7239 This is the only hitch with that size receiver that fits your vehicle, but it does not…

All you will need is a mushing #58184 that will allow you to use the 1 inch ball shank in the 1-1/4 inch diameter hole on your weight distribution head. If you instead decide to get a new ball you can use #19286.

If you were to install the EcoHitch #306-X7239 on your 2017 Ford Fusion then you would have to permanently remove the plastic underbody panel as you can see from the attached photo which is directly from the instructions. I have also attached a photo…

Yes, we do have replacement hardware for your Curt Trailer Hitch Receiver item #C12091. It is the Replacement Hardware Kit for Trailer Hitches item #RHK. You will want to go to that product page and on the right side you will want to put in Curt for…

Before deciding on a trailer to tow with your 2014 Ford Fusion, knowing the towing limitations of your vehicle will be an important factor. In the owner's manual for the 2014 Fusion, it lists the maximum trailer weight of all the powertrain…

Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…

I cannot recommend that you tow a 1,100 lb trailer with your 2016 Ford Fusion SE that has a maximum towing capacity of 1,000 lbs for liability reasons but in all honesty, you would most likely be just fine. Personally, I wouldn't really be…

It really depends on your setup, if the safety chain loops on your tow vehicle are spaced far apart then you will need more slack to make a tight turn then if they were closer together. What I would recommend you do is connect your trailer to your…

Yes! The EcoHitch Item #306-X7239 will work great for your 2017 Ford Fusion. I have included some pictures and an install video. Take a look! I also recommend adding the following accessory: etrailer Hitch Pin Alignment Collar for Bike Racks, Cargo…

I would use 3/4 inch plywood to cover the studs and secure the plywood to the trailer frame studs in as many points as possible. Then, use 1/2 inch wood screws to secure the E-Track Trailer Cargo Control, #E19148, to the plywood. I would use screws…

The EcoHitch Hidden Trailer Hitch Receiver part #306-X7239 is a great option for a 2016 Ford Fusion. It has the larger 2" receiver tube opening which will greatly expand the variety of hitch mounted accessories to choose from. The EcoHitch…