Will Dexter 12 inch Brake Assemblies Fit Lippert Axle

Question

Question:

Dexter Nev-R-Adjust Electric Trailer Brake Kit - 12inch - Left and Right Hand Assemblies - 7K Item # 23-464-465 Will they fit on my Lippert axle?

asked by: Reg N

0

Expert Reply:

If you have a Lippert 7k axle the Dexter Nev R Adjust Assemblies part # 23-464-465 will fit and work well. Dexter and Lippert brake assemblies are made to the same dimensions and bolt pattern so they can be interchanged.

expert reply by: Jameson C

0

Answer 1

For Titan replacement brake pads we offer the part #T4870900 which will fit the Titan 10 and 12 inch disc brake assemblies made by Titan. I couldn't find info on the 250 model calipers, but if you have a 10 or 12 inch assembly this would fit and…

view full answer...

Answer 2

We do not carry the replacement axle for your P12 7K Axle. We do however have the brake assemblies and bearing kit or hub/drum assemblies to assist based on what I can find online for a 7K Dexter axle. You will most likely want the Bearing Kit,…

view full answer...

Answer 3

Actually on brake magnets for trailers either wire can be used as the power or the ground so the colors don't really mean anything. Most likely the magnet manufacturer just put what ever color was most convenient on your trailer.

view full answer...

Answer 4

When Titan still made brakes the components for them were Kodiak. Since you had 250 calipers before then you can use the Kodiak calipers #KDBC250D as replacements if you want to. I have linked a video showing the features of this product for you.

view full answer...

Answer 5

You will have no problem using a Dexter brake assembly on a Lippert 7K axle. We have installed several Dexter brake assemblies on Lippert axles at our shop. Lippert and Dexter use the same standard mounting pattern and brake sizes. If you want…

view full answer...

Answer 6

Many times Dexter hubs will fit on a Lippert axle, but Lippert does have a few axles out there with special spindle sizes. Every Lippert axle comes with a tag or plate on the axle that gives a serial number or NV number. If you can give me that…

view full answer...

Answer 7

Trailer magnets are designed set up for each brake assembly size axle capacity. If you check out the link I attached you will see all of the magnets we carry. From there you will need to click the brand you have, the size assembly you have, and then…

view full answer...

Answer 8

We went ahead and took a look for you at the Dexter Bearing, 42MM Nev-R-Lube 42MM x 76MM x 39MM #31-73-3. I can tell you that what we have is indeed a Timken product that is made in the USA; it says so right on the bearing. I have added a link below…

view full answer...

Answer 9

We do carry the Lippert Electric Trailer Brake Assemblies Left #LC96WD and Right #LC46WD from Lippert for their 4,400lb axles. These brakes are self-adjusting like the Electric Trailer Brake Kit #AKEBRK-35-SA.

view full answer...

Answer 10

The correct hubs for the 4400 Lb Lippert Axle NV178936 are 3,500 lb hubs as confirmed by Lippert. If you need to replace the hubs, I recommend Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased part…

view full answer...

Answer 11

The #84 E-Z Lube Spindle #TRU74FR is the same size spindle uses on your Lippert Torsion Axle. The stub is 1-3/4" diameter and 4-1/4" long. You will need to compare this to the size used on your 2021 Forest River R-Pod 196 to determine if…

view full answer...