Height of Trailer Wheel Center Cap

Question

Question:

Hi, Your product information only gives the diameter of the pilot hole on any of your caps. I am surprised you do not also give the height depth. Anyway, I need that dimension on these caps to make sure they will accommodate the length of the hubs on my axles. Thanks

asked by: Dave R

0

Expert Reply:

The inside height of the center cap # 425EZ is 4-1/4 inches.

expert reply by: Charles S

0

click to enlarge

Answer 1

While unfortunately I don't have any way of knowing specifically what wheel caps are on your Arctic Fox 5th wheel, it's pretty easy to determine what you need. Just measure the center bore from inside to inside of your wheel. For…

view full answer...

Answer 2

The three wires of the Tekonsha Breakaway System part #50-85-313 will get wired as follows: The white wire attaches to the ground wire. The blue wire attaches to the brake output circuit that goes to the brake assemblies of the trailer. The black…

view full answer...

Answer 3

Yes, to replace the center piece of the Trailer Wheel Center Cap, Chrome, 3.19" Pilot Size #319EZ you need the part #CCP-60C.

view full answer...

Answer 4

The Trailer Wheel Center Cap #319EZ may be a little too big if you measured right at 3-1/8" for your hub bore. Since this is a fairly precise measurement I recommend taking it again and possibly use a digital caliper like part #PTW80157 if…

view full answer...

Answer 5

If you measure the diameter of the center hole of your wheel we can easily pick you out a replacement center cap. For example the part #319EZ is a very popular size that fits center holes of 3.19 inch. Another really common size is 4.25 inch like…

view full answer...

Answer 6

What size center cap you need will depend on the what size your pilot (center hole of wheel) is. If you have a pilot size of 3.19 inches then the Excalibur Trailer Wheel Center Cap, Item #319EZ, would work for you. Other options as well as…

view full answer...

Answer 7

The item you selected, Excalibur Trailer Wheel Center Cap, part #425EZ, will fit wheels with a pilot hole size of 4-1/4 inches. The overall height of part #425EZ is 4-3/8 inches. This cover should work well as replacement hub covers for your horse…

view full answer...

Answer 8

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 11

Good morning, Cliff. As of today (3/27/24) we are expecting the #KE33JR tire/wheel combo to be in stock in about 2 weeks. Hopefully this means we can take our own pictures and put them on the site within maybe about 3-4 weeks from now. What I can…

view full answer...

Answer 12

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is…

view full answer...

Height of Trailer Wheel Center Cap

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching