Hub Recommendation for Folding Motorcycle Trailer with Bearings L44649
Question:
I need assistance in picking right parts. It is for a Folding motorcycle trailer with torsion suspension. The numbers I have. 5 lug, 4-1/2 bolt wheel pattern. Bearing race imprinted L44510 OR more likely L44610. Bearing imprinted L44649. Appears to be 1-1/16 ID on bearing center and OD on spindle. Need either bearings/races seals for BOTH sides or probably better to get new hub kit as one lug nut is stripped on one side. Please advise as soon as is possible. Thanks in advance.
asked by: Eugene
Expert Reply:
If both of the bearings are L44649 (most likely they are) the correct hub you need is the part # 8-258-5UC1-EZ which will fit your spindle and also has a bolt pattern of 5 on 4-1/2 inches.
The other way to verify the other bearing number is to measure the spindle where the bearings both ride. If they are both 1-1/16 inch like you mentioned this hub will fit.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- EZ Lube
- L44649
- L44649
- For 2200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Article: 2005-Current Volkswagen Touareg, Audi, or Porsche Cayenne
- Shop: Brake Controller
- Search Results: d washer
- Search Results: tools
- Search Results: microfiber towel
- Search Results: griots garage
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2
- Shop: Easy Grease Trailer Idler Hub for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Hubs For A Short Spindle On A 2006 EZ Loader Trailer
- Shop: Replacement Spindle Washer - Tang Type for E-Z Lube
- Shop: SmartStraps Adjustable Bungee Cord w/ Coated Steel Hooks - 16" to 24" Long - Green
- Shop: D Washer for EZ Lube Spindles
- Shop: Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Q&A: Difference Between Dexter 3,500 lb Trailer Axles, EZ Lube vs. non EZ Lube
- Q&A: What Spindle Does Trailer Hub # AKIHUB-545-2-LF-2K Fit
- Q&A: Replacement Bearing Kit and 5 on 4-1/2 Inch Bolt Pattern Idler Hub for 1-1/16 Inch Diameter Spindle
- Q&A: etrailer Idler Hub Assembly to Fit 2K Dexter Trailer Axle Beam with Standard BTR Spindles
- Q&A: Tekonsha P2 vs P3 Brake Controller Recommendation for 2013 GMC Yukon
- Q&A: Looking for 5 on 4-3/4 Inch Bolt Pattern Idler Hub Compatible with L44649 Inner and Outer Bearings
- Shop: Trailer Hitch
- Video: Choosing the Right Brake Controller
- Search Results: 44649
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Video: Choosing the Right Trailer Wiring
- Search Results: 68149
- Shop: Gooseneck Hitch
- Video: Timbren Axle-Less Trailer Suspension System Installation
on Trailer Hubs and Drums
