Replacement Bearing Kit and 5 on 4-1/2 Inch Bolt Pattern Idler Hub for 1-1/16 Inch Diameter Spindle
Question:
Hello ....I just acquired a trailer that is built with a p 15 ......found this number as well snd4263410.....its a 4 lug axle. I want to buy 5x 4.5 lug hubs for this axle. Could you tell me if the spindles are 1 1/16 ....thank you for your time
asked by: Ron R
Expert Reply:
Thank you for the information. I was able to confirm with my contact at Dexter Axle that your spindle does have the 1-1/16" diameter so you would need the equivalent of 2 of the 031-031-02 bearings and 1 of the 010-060-00 seals for each hub.
This means the replacement bearing kit # BK1-150 is what you'd need for your axle so for a replacement hub you need the Easy Grease Trailer Idler Hub for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 Bolt Pattern # AKIHUB-545-2-LFEZ-2K.
Attached is an installation video for you to check out.
Products Referenced in This Question
Easy Grease Trailer Idler Hub for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649
- Race L44610
- 2200 lbs Axle
- etrailer
more information >
Continue Researching
- Article: 2005-Current Volkswagen Touareg, Audi, or Porsche Cayenne
- Shop: Brake Controller
- Search Results: d washer
- Search Results: microfiber towel
- Search Results: griots garage
- Search Results: tools
- Shop: Easy Grease Trailer Idler Hub for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2
- Q&A: Replacement Hubs For A Short Spindle On A 2006 EZ Loader Trailer
- Shop: Pollak 7 Pole to 4 Way Connector Adapter
- Shop: Hopkins Trailer Connector Adapter - 7-Pole Round Pin to 7-Pole RV
- Shop: D Washer for EZ Lube Spindles
- Shop: Dexter Trailer Axle Beam with Standard Spindles - 72" Long - 2,000 lbs
- Q&A: Looking for 5 on 4-3/4 Inch Bolt Pattern Idler Hub Compatible with L44649 Inner and Outer Bearings
- Q&A: Length of Hub For 2k Axles
- Q&A: Difference Between Dexter 3,500 lb Trailer Axles, EZ Lube vs. non EZ Lube
- Q&A: How to Determine Correct Replacement Hub for Coleman Pop-Up Camper
- Q&A: etrailer Idler Hub Assembly to Fit 2K Dexter Trailer Axle Beam with Standard BTR Spindles
- Q&A: What Spindle Does Trailer Hub # AKIHUB-545-2-LF-2K Fit
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Trailer Wiring
- Search Results: brake controller
- Shop: Trailer Wiring
- Search Results: trailer brake controller
- Article: Trailer Wiring Diagrams
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: 90160
- Article: Most Popular Wheel Bearings