Will Grease Seal 13194 Fit with Dexter Axle 8-258 Hub
Question:
Does the dexter #13194 inner grease seal fit with the 8-258 dexter hub and a 1 1/16inch btr spindle which has a 1 3/8inch approx flange that the grease seal rotates on. Im having a hard time finding this particular grease seal for an older coleman taos pop up camper. It seems the new grease seals have either a 1 1/4inch or 1 1/2 inner diameter for newer spindles.
asked by: Ronnie
Expert Reply:
Yes, the Grease Seal # 13194 will fit just fine with a Dexter Axle 8-258 like part # 8-258-5UC1.
I would verify fitment of this seal with your spindle by using a digital caliper like part # 301-17068. What you'll want to do is measure the diameter of your spindle where the grease seal rides. The seal # 13194 mentioned above has a 1.372" ID.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.4 Inch I.D.
- 1.983 Inch O.D.
- Redline
more information >
Continue Researching
- Article: 2005-Current Volkswagen Touareg, Audi, or Porsche Cayenne
- Shop: Brake Controller
- Search Results: tools
- Search Results: griots garage
- Search Results: microfiber towel
- Search Results: d washer
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Hubs For A Short Spindle On A 2006 EZ Loader Trailer
- Shop: Griot's Garage 2-Sided Interior Cleaning and Buffing Towels - 16" x 16" - Qty 3
- Shop: Pollak 7 Pole to 4 Way Connector Adapter
- Shop: Replacement Spindle Washer - Tang Type for E-Z Lube
- Shop: Dexter Trailer Axle Beam with Standard Spindles - 72" Long - 2,000 lbs
- Shop: D Washer for EZ Lube Spindles
- Q&A: Spindle and Trailer Idler Hub For 2,000LB Trailer With 15", 5 On 4-1/2" Bolt Pattern Wheels
- Q&A: Looking for 5 on 4-3/4 Inch Bolt Pattern Idler Hub Compatible with L44649 Inner and Outer Bearings
- Q&A: Length of Hub For 2k Axles
- Q&A: How to Determine Correct Replacement Hub for Coleman Pop-Up Camper
- Q&A: Difference Between Dexter 3,500 lb Trailer Axles, EZ Lube vs. non EZ Lube
- Q&A: What Spindle Does Trailer Hub # AKIHUB-545-2-LF-2K Fit
- Search Results: trailer wheel bearings
- Search Results: dexter wheel bearings
- Search Results: dexter 8 258