Recommended Crossbars to Use on a 2015 Toyota RAV4 to Carry the Thule Hullavator Pro TH898

Question

Question:

What cross bars would I need for the 2015 Rav4 to use the thule hullavator

asked by: Lauren H

0

Expert Reply:

For the Thule Hullavator Pro # TH898 to properly fit on your 2015 Toyota RAV4 your crossbars will simply need to extend 4-8 inches beyond the feet of the roof rack.

If your RAV4 has the raised side rails then the best option for you to go with would be the Thule WingBar system. This includes the WingBar Evo Crossbars, part # TH711400 for Silver or part # TH711420 for Black, and the Evo Feet # TH710401. This will give you enough clearance for the Hullavator. To lock the crossbars to your side rails and the Hullavator to your crossbars you will also need the 6 pack of Thule's One-Key System # TH450600.

If, instead, your RAV4 has the naked roof I recommend going with the Rhino-Rack Aero roof rack. This includes the Aero Crossbars # RRVA137B-2, the 2500 Series Legs # RRRLKVA, and the DK Fit Kit # DK449. This roof rack system comes with plastic locks (can be upgraded to metal with part # RRVA-LEC4) to secure to your roof so you will just need the 2 pack of Thule's One-Key System # TH450200 to lock the Hullavator to this roof rack.

Both of these roof racks have a weight capacity of 165 lbs.

I have attached some installation videos of both roof racks for you to use as a reference as well as a review video of the Hullavator for you to check out.

expert reply by: Jon G

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 3

The Thule Hullavator Pro, part #TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those…

view full answer...

Answer 4

That's ironic because currently (March 2022) Thule doesn't have a fit listed for the 2022 Subaru Forester Wilderness. With that being said, from our research it looks like the Wilderness models on the newer Subaru vehicles won't affect…

view full answer...

Answer 5

There is not a general restriction from Thule that says two Hullavator Kayak Carriers #TH898 can't be used on a Thule roof rack. As long as the crossbars on your Ford Escape have the required length for two sets and a sufficient weight capacity…

view full answer...

Answer 6

For your 2018 Honda HR-V to be compatible with the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs #TH898, you have to use slightly longer crossbars. The Hullavator requires 4-8 inches overhang to give clearance. In order to give…

view full answer...

Answer 7

Yes, you will be able to use the Thule Hullavator Pro Kayak Roof Rack #TH898 with the Rhino-Rack Vortex Aero roof rack having 59" crossbars. You will need the Crossbars #RRVA150B-2, Legs #RRRLKVA and Fit Kit #DK079 to complete the rack on your…

view full answer...

Answer 8

There are two ways to connect the Thule Hullavator to your crossbars, clamp on or use the T-slot. Clamp on requires square bars and T-Track requires a Thule Crossbar. If you have raised side rails on your vehicle, the SteelTop #MPG203 will just clamp…

view full answer...

Answer 9

Hello Paul thanks for your question. When installing the Thule Hullavator Pro #TH898 it is completely normal to have 4 leftover bolts. The length of the bolt you use is determined by what kind of crossbar you are using. The 35mm bolts are intended…

view full answer...

Answer 10

Yes, the Thule Hullavator Pro Kayak Carrier part #TH898 will work with the Thule WingBar Evo Crossbars. These are just an updated version of the Thule AeroBlade Crossbars. The Hullavator can be attached to the WingBar in one of two ways, with…

view full answer...