Yakima Mighty Mount Compatibility With Factory Crossbars On 2007 Honda Odyssey

Question

Question:

Will it fit the factory crossbar for 2007 Honda Odyssey EX?

asked by: Marvin R

0

Expert Reply:

The Universal MightyMounts for Yakima Roof Mounted Accessories # Y03590 will fit on your 2007 Honda Odyssey EX OEM crossbars as long as they are not more than 4 inches wide or 1-1/2 inches tall.

The Yakima 39H adapter # Y03539 will fit around crossbars that measure 1 inch tall by 2-3/4 inches wide. If your factory bars are within these measurements then these adapters could work for you.

expert reply by: Jason S

0

click to enlarge

Answer 1

The #Y03539 MightyMount 39H fits crossbars up to 3-1/8 inch wide by 1 inch tall, so they'll just fit your 3-1/8 inch wide by 1 inch tall WingBar Evo crossbars. Per Yakima, the #Y03539 Mighty Mount is compatible with the Y07012 BasketCase roof…

view full answer...

Answer 2

To adapt your older Yakima Ski Racks to the factory crossbars on your 2011 Honda CR-V you will most likely need to use the Universal Mightymounts #Y03590 which is made to adapt most Yakima accessories to factory crossbars that are not wider than 4…

view full answer...

Answer 3

The Mighty Mount 39H #Y03539 and 23H #Y03523 Accessory Adapters are pretty much the same thing and will be compatible with 3-1/8" wide x 1" tall crossbars. The biggest difference between these adapters is that the 39H is designed…

view full answer...

Answer 4

Your Yakima HighRoller bike racks will work with the Universal MightyMounts #Y03590. I have cut out a section of the instructions from both the HighRoller and the MightyMounts and the HighRoller specifies using MightyMounts while the linked…

view full answer...

Answer 5

The Yakima RocketBox Pro like part #Y07192, is a 14 cubic ft cargo box that measures 74 x 33 x 16 inches. The Yakima Skybox NX, part #Y95AV measures 75-1/2 x 35 x 16 inches and has 16 cubic feet of cargo space. The Skybox has 3 ribs in the lid,…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 9

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest you'll…

view full answer...

Answer 12

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...