Do Universal MightyMounts Work With Yakima HighRoller Bike Rack

Question:

I have a couple Yakima HighRoller bike racks, and according to Yakima, the Universal Mightymounts are not compatible with them. It looks like something similar to the 32H would work, but Ive read that they dont quite fit Aeroblades. Any other products I could improvise with? If the 32H is too large, I could use inner tube to shim it to fit.

asked by: Ron P

Expert Reply:

Your Yakima HighRoller bike racks will work with the Universal MightyMounts # Y03590.

I have cut out a section of the instructions from both the HighRoller and the MightyMounts and the HighRoller specifies using MightyMounts while the linked instructions from the Universal MightyMounts # Y03590 actually has its own page dedicated to use with the HighRoller.

expert reply by: Kyle S

click to enlarge

Aaron

5/2/2020

I have the highroller and the mighty mounts, trying to install on a 2011 Subaru Impreza with factory crossbars which are elliptical. I was able to secure the front two mounts however I cannot figure out how to attach the rear mount to the wheel tray? I do not have t slots.

Chris R.

5/4/2020

When using the MightyMounts on the HighRoller, the rack/bike will actually be mounted backwards. The two MightyMounts will go on the rear bar and the one will go at the front. Take a look at the snippet attached above, along with the HighRoller section detailed in the MightyMounts # Y03590 manual, which is located on the product page.