Weight Limit for the Aluminum Scissor Steps # AS24

Question

Question:

What is the weight limit for the AS24 Scissor Steps?

asked by: Warren G

0

Expert Reply:

The weight capacity of the Aluminum Scissor Steps, item # AS24, is 300 pounds.

expert reply by: Robert G

0

Answer 1

The big difference is that the part #TLA7804-8000 does not come with a bracket for how it attaches to the truck whereas the part #TLA7834 does. The bracket is for a more permanent install where they'd fold up and store on the vehicle…

view full answer...

Answer 2

The shipping weight for the Brophy aluminum scissor steps #AS04 is 20.72 pounds. The step size is 18 inches x 6 inches deep and vertical height measures between 31 and 39 inches high. These steps have a weight capacity of 250 pounds. The weight…

view full answer...

Answer 3

I checked with Brophy and the folded dimensions of the scissor steps part #AS24 are 25" x 17" x 13".

view full answer...

Answer 4

The Brophy Aluminum RV Scissor Steps #AS24 that you referenced have a 300-lb capacity and extend to between 31- and 39-inches in height. In order to accurately recommend stairs, I'll need to know the distance from where the steps mount to…

view full answer...

Answer 5

Your concern about being potentially trapped inside your RV is certainly a valid one, and also a common one with the Stromberg Carlson Lend-a-Hand. While there isn't a way to easily stop it from pivoting across the front of the door, there…

view full answer...

Answer 6

The Hand Rail part #AHR3 that you referenced includes a mounting bracket that will attach to the trailer and allows a pin to run through the handle to secure it to the bracket. For more info check out the review video I attached that shows the 4…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Hey Al, this is a great question but since you have free-backing plates now you would never need to mess with the manual lock out of your Atwood coupler.

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Weight Limit for the Aluminum Scissor Steps # AS24

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching