Need a Replacement Bearing Buddy Dust Cap Bra for Model 178

Question

Question:

I need two 2 bearing buddy model 178 bras dust caps.

asked by: Lyman M

0

Expert Reply:

If you have model 1781, or 1781SS, the correct replacement Bearing Buddy Bra will be # BB17B. These covers are going to slide over your Bearing Buddy, and have an outer diameter of two inches.

expert reply by: Kyle S

0

Answer 1

The Replacement Bearing Buddy Bras Model 17B, part #BB17B, will fit on Bearing Buddy grease caps for hub bores from 1.781-inches to 1.810-inches. These caps will have an outer diameter of close to 2-inches. Because these bras are made of flexible…

view full answer...

Answer 2

It sounds like you are looking for the Bearing Buddy coverbra #BB19B. The closest Bearing Buddy sizes that are close to the 2 inches that you measured are either 1.98 inches or 2.047 inches. The Bearing Buddy #BB17B you referenced are too small for…

view full answer...

Answer 3

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 4

The Karrier ST175/80R13 Radial Trailer Tire #AM10199 that is on the Wheel and Tire Package #AM31952 is Kendas best tire in this size. It is their KR03 tire line and uses Double steel belts and full nylon plies combine for superior function and long…

view full answer...

Answer 5

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 6

Yes, the Loadstar ST175/80D13 Bias Trailer Tire, #AM1ST74, is the replacement size for the B78-13 tire size. You will want to make sure the load capacity of 1,100 lbs. at 35 psi will be sufficient for your trailer. I also have the Karrier ST175/80R13…

view full answer...

Answer 7

Installing Bearing Buddies like #BB1781 is fairly straight forward. I have included a link to a video and if you fast forward to about the 5:20 minute mark, our installer puts one on. He lines it up first and gives it a tap to get started. Then he…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 11

A tow package for a vehicle is usually a frame mounted trailer hitch and trailer wiring on a vehicle like your 2002 Dodge Dakota. If you have those two things you could pretty easily assume you have the tow package. Or, you can take the VIN of your…

view full answer...

Answer 12

The Replacement Amber Lens for MC32AB Trailer Lights #A32AB is a direct replacement for the SAE A P2 DOT 14 and would be what you'd need.

view full answer...

Need a Replacement Bearing Buddy Dust Cap Bra for Model 178

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching