Install Instructions for Draw Tite Trailer Hitch 76170 for 2018 Honda Odyssey

Question

Question:

Im looking to purchase a trailer hitch for a 2018 Honda Odyssey. I believe the hitch I need is the Draw Tite Item # 76170. Is it possible to view the installation instructions before I purchase? I dont see a link anywhere on the product page for this. Thank you.

asked by: Robert C

0

Expert Reply:

For your 2018 Honda Odyssey the Draw Tite hitch part # 76170 is a confirmed fit.

I attached a picture that shows the install instructions for this hitch for you to check out as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The biggest difference between the Curt Trailer Hitches, #C64NR and the etrailer #e98855, is the #C64NR hitch sits up closer to the bumper which will give you a little more clearance between the bottom of the hitch and the ground. The Curt #C64NR is…

view full answer...

Answer 2

Both the Tekonsha T-One Vehicle Wiring Harness #118781 and the Curt #C56382 T-Connector are custom harnesses designed specifically for your 2020 Odyssey, and will plug into the same factory port behind the driver side trim panel. In terms of function…

view full answer...

Answer 3

The difference between the Curt #C56382 and the Tekonsha T-One #118753 for your 2018 Honda Odyssey is that the Curt is for if the fuse locations actually have pins in them. The Tekonsha option is for if the fuse locations are lacking the pins to…

view full answer...

Answer 4

Yes, the Curt Trailer Hitch Receiver #C64NR is included on etrailer.com and does fit the 2022 Honda Odyssey.

view full answer...

Answer 5

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 6

It sounds like you're trying to replace the Lippert Rhino Box Pin box on your 2021 Cedar Creek 31IK, and to replace a RhinoBox you can use the MORryde Cushioned 5th Wheel Pin Box #MR55QR, which is designed to replace a Lippert Rhino Box 21k. If…

view full answer...

Answer 7

Your trailer's brakes will not lock up from the battery in a breakaway kit, like the Hopkins Brake Master #HM20001 being dead. If the breakaway battery is dead there won't be any power supplied from the system and it wouldn't have any…

view full answer...

Answer 8

According to your 2014 Ford F-250, the fuse number 26 (30A) is trailer tow park lamps. You will also want to check relay 29 for trailer tow park lamps. Fuse number 70 (10A mini fuse) is for trailer tow backup lamp and relays 74, 75, 76 are for…

view full answer...

Answer 9

When choosing the slider you want to measure the outside front of box width including the flange. Then you need to select a slider that extends a minimum of 2-1/2 inches beyond each side of the box width. For example, the Black Solera Slider…

view full answer...

Answer 10

The breakaway system battery is not related to whether or not your truck will sense a trailer connection. It actually will look for the slight amperage draw that brake magnets create to determine this. While I strongly recommend waiting to have your…

view full answer...

Answer 11

The 3 wire component is the charger and receives 12V power from the vehicle connector and charges the breakaway battery. Now the blue wire coming off the charger will go out to the breakaway switch. I included a video on a similar charger #20011 for…

view full answer...

Answer 12

It appears that your u-bolt plate on your 2021 Grand Design Reflection 31MB, will work with the SumoSprings Trailer Helper Springs #SS26MV. The plate itself including the bends does not appear to be larger than 3/4" nor does the width appear to…

view full answer...

Install Instructions for Draw Tite Trailer Hitch 76170 for 2018 Honda Odyssey

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching