Hitch for 2022 Honda Odyssey

Question

Question:

Curt lists this model as fitting the 2022 Odyssey. Will Etrailer include this one for the 2022 year? Thanks in advance!

asked by: Janna M

0

Expert Reply:

Yes, the Curt Trailer Hitch Receiver # C64NR is included on etrailer.com and does fit the 2022 Honda Odyssey.

expert reply by: Scott S

0

Answer 1

What that means is that the cross section of the hitch that runs side to side is completely out of sight once it's installed onto the vehicle. The hitch you looked at, part #C13065, has a hidden cross tube that you can't see with it…

view full answer...

Answer 2

You are correct that for your 2022 Honda Odyssey there are a few different vehicle wiring harness options which can make things a bit confusing. The first two harness we will look at are the Tekonsha #118781 and the Curt #C56382. These harness are…

view full answer...

Answer 3

The biggest difference between the Curt Trailer Hitches, #C64NR and the etrailer #e98855, is the #C64NR hitch sits up closer to the bumper which will give you a little more clearance between the bottom of the hitch and the ground. The Curt #C64NR…

view full answer...

Answer 4

The difference between the Curt #C56382 and the Tekonsha T-One #118753 for your 2018 Honda Odyssey is that the Curt is for if the fuse locations actually have pins in them. The Tekonsha option is for if the fuse locations are lacking the pins to…

view full answer...

Answer 5

Both the Tekonsha T-One Vehicle Wiring Harness #118781 and the Curt #C56382 T-Connector are custom harnesses designed specifically for your 2020 Odyssey, and will plug into the same factory port behind the driver side trim panel. In terms of…

view full answer...

Answer 6

In terms of the installation procedure, the appearance of the hitch and the weight capacity, the EcoHitch #306-X7372 and the Curt #C64NR Class III hitches are for all intents almost identical. Both the EcoHitch and the Curt are manufactured in the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

For your 2024 Honda Odyssey I would recommend the Hidden Hitch part #DT76GR if you wanted a totally hidden hitch that has a removable lower opening. This would give you a totally hidden hitch when not in use but it does cost a bit more. For a similar…

view full answer...

Answer 9

There is some trimming of the fascia required when installing on your 2020 Honda Odyssey when you are installing the Curt Trailer Hitch Receiver #C64NR. The only trimming required is a 1.75" x4" section of the bottom appearance panel, which…

view full answer...

Answer 10

With a minivan, the hitch tongue weight clearance and its ground clearance are the two main things you'll need to contend with regarding using hitch mounted accessories. The Curt Class III receiver, part #C64NR features a crossbar that is mainly…

view full answer...

Answer 11

You are correct, both the etrailer hitch, #e98855 and #C64NR are confirmed to fit your 2020 Honda Odyssey. However, there are a few details that differentiate the two. The main thing that sets these two apart is that the Curt #C64NR has a concealed…

view full answer...

Hitch for 2022 Honda Odyssey

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching