Parts Needed To Replace Trailer Wiring
Question:
The wires under the truck are cracked. How do you get to the wires inside the truck? Mercury Mountaineer 2002 6 cylinder
asked by: Ken
Expert Reply:
When people replace wiring that is run inside a channel or frame they will attach the new wiring to the end of the wire they want to replace and pull it carefully from the other end. If you are unable to pull the wire, you can use a fish wire to try and run the wiring through the frame. This can be tough depending on the frame or channel.
Another method is to run new wiring on the outside of the trailer frame. You can use a wire loom to protect the wires from being damaged. Or you cold cut the wiring that you can visually see and replace it with spliced wiring. I have attached a link to the wiring we offer for trailers.
I have also attached a link to the wire looms and clamps we offer. The wire loom clamps are also on the product page. You will want to secure the loom with the wiring with the clamps. You want to make sure you keep the wiring away form moving parts or sharp edges.
Product Page this Question was Asked From
Wire Loom, 3/8" Diameter, 10' Long
- Wiring
- Wiring Protection
- Wire Loom
- 3/8 Inch Diameter
- Hopkins
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Pollak Wiring PK52248 Review
- Shop: Replacement Brake Wire Retaining Clip for Electric Trailer Brakes - Qty 1
- Q&A: Recommended Wiring Junction Box For Utility Trailer
- Q&A: What Gauge Wire Can the 3/8 Inch Wire Loom Hold?
- Q&A: What is the Inside Dimension of Hopkins 3/8 Inch Wire Loom and is it Split Down One Side
- Video: Review of Hopkins Wiring - Wire Loom - 39035
- Shop: Wire Loom, 3/8" Diameter, 10' Long
- Search Results: rivet nut
- Search Results: 7 pin junction boxes
- Q&A: Dimensions of the Trailer Wiring Junction Box
- Video: Review of Hopkins Trailer Wiring - Trailer Connectors - HM20041
- Video: Hopkins 7-Way Blade Style Connector Review
- Video: Buyers Products Wiring 3375601100 Review
- Video: Pollak 10-Terminal Junction Box Installation
- Video: Review of Reese - Weight Distribution - RP58507
- Shop: Hopkins 7-Way Blade Style Connector with Molded Cable - Trailer End - 8' Long - Auto Standard
- Shop: Trailer Wiring Junction Box - 7 Terminals - Polypropylene
- Shop: Trailer Wiring Junction Box
- Shop: Pollak 10-Terminal Junction Box
- Shop: Epicord 7-Way Molded Trailer Plug with Junction Box - 10' Long
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Trailer Wiring Diagrams
- Search Results: trailer brake controller
- Q&A: 7-Way Trailer Plug Adapter or Compatibility with Lance Slide-In Truck Bed Camper
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: brake controller
- Shop: Trailer Hitch
- Shop: Brake Controller
- Search Results: trailer hitch
on Wiring
