bing tracking image
Q & A Icon

Brake Controller Install Instructions for 2016 GMC Canyon  

Question:

Hey , saw your response on the following: I also have a 2016 GMC Canyon SLT but a different brake controller. I have a Primus IQ 90160 controller by Tekonsha. Would the wiring instructions be the same? Thx,

1

Helpful Expert Reply:

Yes, the Primus IQ Brake Controller part # TK90160 will install the exact same as the following instructions:

According to my research, the 2016 Colorado/Canyon with the factory 7-way won't have a plug under the dash for installing a brake controller, but there will be bare tow package wires that you can wire the brake controller directly to. The tow package wiring is located behind the left kick panel, as you suspected. The wiring pigtail that came with your brake controller would wire up to the tow package wiring as follows:

Black pigtail wire connects to red/green tow package wire (12-volt to brake controller)
Red pigtail wire connects to white/blue tow package wire (stop lamp switch to brake controller)
White pigtail wire to black tow package wire (ground connection)
Blue pigtail wire to blue tow package wire (output from controller to trailer brakes)

I'll link you to a photo showing exactly where the wiring is located, as well as to a photo showing where all the tow package fuses are located. The fuses are already in place.

expert reply by:
1
Jameson C
click to enlarge

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>