Troubleshooting Missing Zerk Fittings On Wet Bolts
Question:
I have 14 wet bolts installed on my trailer. Can these be refitted with threaded Zerc fittings, or can replacement zerc fittings be purchased. Mine are installed and already missing zerc fittings.
asked by: Jeraldine T
0
Expert Reply:
I reached out to the manufacturer and the Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3-5/16" Long # 126B2 is a pressed in zerk fitting, so it cannot be replaced. There are not threaded zerk fittings available for this bolt size, so it will require purchasing new bolts to have those working zerk fittings.
expert reply by:
Jason S
0
Product Page this Question was Asked From
Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
- Trailer Leaf Spring Suspension
- Suspension Bolts
- Camper
- Car Hauler
- Utility Trailer
- 9/16 Inch Diameter
- 2-5/16 Inch Long
- Redline
more information >
Continue Researching
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Can Tandem Axle Trailer Suspension Kit APT8 be Ordered with Wet Bolts
- Article: How to Raise Your Travel Trailer Height
- Q&A: Issue with Bearing Buddy Leaking Grease from Overfill Port
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Axle Components For Dexter D80 8,000LB Axle Under 2016 Landmark Orlando 5TH Wheel
- Article: Most Popular Wheel Bearings
- Q&A: Difference Between Single, Dual and Free Backing Servo Brake Assemblies
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Q&A: Wet Suspension Bolt vs a Regular Suspension Bolt
- Q&A: Torque Rating Requirements for Installing Leaf Springs on a 7000 lb Tandem Axle Trailer