Timbren Axle Less Suspension System Recommendation for Older Aliner Camper

Question

Question:

I have an older model aliner camper not sure what year and I am interested in the timbren axle-less trailer suspension. I currently need a 6 inch hitch drop so I would like to lift the trailer. I would appreciate your recommendations. Thanks

asked by: Kevin H

1

Helpful Expert Reply:

For a 3,500 lb Timbren axle with a 4 inch lift built into it we have the part # ASR3500S06 which would be a great option without knowing more about your setup though it's hard to give a more detailed recommendation.

expert reply by: Jameson C

1

Answer 1

It is possible that the Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs #20545I-EZ-72-15 you were looking at will fit your 2012 Aliner Classic Camper but the only way to be sure it to measure your…

view full answer...

Answer 2

I do have an option for you but the 2010 Aliner Ranger Trailers all use AL-KO axles and there is not a bolt-on lift kit for these. The only option we can provide to lift the trailer would be to use the Timbren Heavy-Duty Axle-Less Trailer Suspension…

view full answer...

Answer 3

For a torsion axle such as your Avan Aliner we have kits available that will give you some extra clearance. The Avan Aliner is a single axle trailer, so we have two kits that will work for you. Torsion axles must be side-mounted and not top mounted…

view full answer...

Answer 4

The correct Timbren Axle-Less Trailer Suspension for an Aliner Ranger 10 Trailer will come down to what you want to use the trailer for. If you are just looking to run the same wheels/tires you had before and pull it on the highway then the standard…

view full answer...

Answer 5

In order to find a correct replacement axle for your trailer, you will want to match the existing axle's spring center measurement, hub face measurement, axle weight capacity, and wheel bolt pattern. I have attached a diagram showing where to…

view full answer...

Answer 6

I can tell you how to go about determining if a Lippert Axle Riser Kit will fit your trailer, but these are universal fits, and we don't have any way of knowing what specific axles are on any year, make, or model of trailer. So in order to…

view full answer...

Answer 7

I will assume you are looking for an A-frame mounted jack, because that is what pop-ups typically use, and because that is the part you referred to. The bolt hole pattern is standard, so matching up with the holes in the trailer tongue should not be…

view full answer...

Answer 8

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 9

Hi Bruce, To lift your trailer we'll first need to check of the suspension and see if you have torsion axles or a leaf spring suspension. If you have torsion axles then I'll need to see the axle tag in order to determine what you have so I…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

view full answer...

Answer 12

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Timbren Axle Less Suspension System Recommendation for Older Aliner Camper

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching