Fifth Wheel Hitch Recommendation for 2017 Ford F-250 with Factory Rail Kit  

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

There isn't quite enough info yet for your setup to know if you'd have issues with bed rail to fifth wheel overhang clearance. The pin box of the trailer is going to hang down quite a bit from the frame of the trailer it is attached to.…

I called my contact at B&W and they told me that they do not have a designated place on the Companion for a breakaway cable to attach. They said most customers attach the cable to the pin on the back of the fifth wheel head that is used for…

If you had the Reese style of factory fifth wheel rail kit in the bed of your 2008 Ford F-350 the correct B and W fifth wheel hitch you'd need is the Companion part #BWRVK3300. This fits the rail kit directly and will give you the best fifth…

The best fifth wheel hitch we offer to fit the OEM fifth wheel rail kit of your 2019 Ford F-350 is the B and W Companion hitch part #BWRVK3300. This USA made hitch has the reputation of being the best hitch on the market because of how well made it…

Yes, the Companion hitch #BWRVK3300 that you referenced would work great in the bed of your 2022 Ford F-250 short bed to tow a Grand Design 303RLS. I checked out pictures of the camper and since it has an extended pin box and a tapered nose designed…

Yes, the correct wedge for your Lippert Turning Point pin box and B&W Companion OEM 5th Wheel Hitch for Chevy/GMC Towing Prep Package #BWRVK3710 is the Replacement Wedge Block for Lippert Turning Point Pin Box #LC79UD.

A wedge is needed, yes, and the Lippert Turning Point pin box does come with a universal wedge, but it is not a very good fit with the B&W Companion #BWRVK3710. So I highly recommend instead using the 5th Airborne Custom Wedge for B&W Fifth…

The A series of Curt 5th wheel trailer hitches, such as #C16120, is the newest version and is replacing the Q series. The A series jaws overlap whereas the Q series butt up against each other more than overlap. And the bearing and shaft that the head…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…